1.9.0 lb_count_call issue

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

1.9.0 lb_count_call issue

Seth Schultz
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

shaheryarkh
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]
_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

Seth Schultz
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth

      On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

shaheryarkh
humm, then its most likely a bug. Please report it in tracker. :-(

Thank you.


On Sun, Feb 10, 2013 at 1:04 AM, Seth Schultz <[hidden email]> wrote:
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth


      On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

Seth Schultz
I have opened a ticket.

https://sourceforge.net/tracker/?func=detail&aid=3603973&group_id=232389&atid=1086410

Thanks,
Seth

      On 2/9/2013 7:18 PM, Muhammad Shahzad wrote:
humm, then its most likely a bug. Please report it in tracker. :-(

Thank you.


On Sun, Feb 10, 2013 at 1:04 AM, Seth Schultz <[hidden email]> wrote:
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth

On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

Liviu Chircu
Hello,

The issue has been solved. Please feel free to test it out.

Regards,
Liviu Chircu
OpenSIPS Dev
http://www.opensips-solutions.com
On 02/10/2013 02:27 AM, Seth Schultz wrote:
I have opened a ticket.

https://sourceforge.net/tracker/?func=detail&aid=3603973&group_id=232389&atid=1086410

Thanks,
Seth
On 2/9/2013 7:18 PM, Muhammad Shahzad wrote:
humm, then its most likely a bug. Please report it in tracker. :-(

Thank you.


On Sun, Feb 10, 2013 at 1:04 AM, Seth Schultz <[hidden email]> wrote:
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth

On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

Seth Schultz
Liviu,

I will try and test this today.

Thank you,
Seth

On 2/11/2013 6:17 AM, Liviu Chircu wrote:
Hello,

The issue has been solved. Please feel free to test it out.

Regards,
Liviu Chircu
OpenSIPS Dev
http://www.opensips-solutions.com
On 02/10/2013 02:27 AM, Seth Schultz wrote:
I have opened a ticket.

https://sourceforge.net/tracker/?func=detail&aid=3603973&group_id=232389&atid=1086410

Thanks,
Seth
On 2/9/2013 7:18 PM, Muhammad Shahzad wrote:
humm, then its most likely a bug. Please report it in tracker. :-(

Thank you.


On Sun, Feb 10, 2013 at 1:04 AM, Seth Schultz <[hidden email]> wrote:
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth

On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: 1.9.0 lb_count_call issue

Seth Schultz
In reply to this post by Liviu Chircu
I have confirmed this is now working.

Thanks,
Seth

On 2/11/2013 6:17 AM, Liviu Chircu wrote:
Hello,

The issue has been solved. Please feel free to test it out.

Regards,
Liviu Chircu
OpenSIPS Dev
http://www.opensips-solutions.com
On 02/10/2013 02:27 AM, Seth Schultz wrote:
I have opened a ticket.

https://sourceforge.net/tracker/?func=detail&aid=3603973&group_id=232389&atid=1086410

Thanks,
Seth
On 2/9/2013 7:18 PM, Muhammad Shahzad wrote:
humm, then its most likely a bug. Please report it in tracker. :-(

Thank you.


On Sun, Feb 10, 2013 at 1:04 AM, Seth Schultz <[hidden email]> wrote:
Muhammad,

Thank you for the reply.  I also tried a hard coded value with the same result.

Thanks,
Seth

On 2/9/2013 6:50 PM, Muhammad Shahzad wrote:
I think both group and resource parameters can not be variables. Can you check with hard coded values?

Thank you.


On Sat, Feb 9, 2013 at 9:58 PM, Seth Schultz <[hidden email]> wrote:
Hello,

I am having trouble with the new function in 1.9.0 lb_count_call.  Please look at the snippet below.

failure_route[1]
{
...
xlog("L_WARN", "trying to count call ip=$dlg_val(route) port=$dp group=$dlg_val(balance_pool) resource=$dlg_val(balance_resource)\n");
if ($dlg_val(balance_pool) = "1")
{
    if (lb_is_destination("$dlg_val(route)", "$dp", "1", "1"))
    {
        xlog("L_WARN", "counting call!\n");
        if (lb_count_call("$dlg_val(route)", "$dp", "1", "$dlg_val(balance_resource)"))
        {
            xlog("L_WARN", "call counted on sip:$du:$dp\n");
        }
    }
}

...
}

Here is the output I see in my log file:

Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: trying to count call ip=xxx.xxx.xxx.xxx port=5060 group=1 resource=pstn
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: counting call!
Feb  9 15:53:07 opensips-vm /sbin/opensips[16562]: ERROR:load_balancer:lb_count_call: no destination to match the given IP and port (xxx.xxx.xxx.xxx:5060)
Notice that it gets a positive result when calling lb_is_destination, however, lb_count_call is throwing an error message indicating it can't match a destination.

On a side note, I am having trouble getting the "group" parameter to accept variable input (i.e. $dlg_val(group)).

Thanks,
Seth

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: [hidden email]
Email: [hidden email]


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users