Error on presence_xml

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

Error on presence_xml

bay2x1
I have integrated openxcap on my config and opensips fails to run generating error log below....

Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init: Dialog module - initializing
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:mod_init: initializing module ...
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:presence_xml:mod_init: Can't bind xcap_client
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod: failed to initialize module presence_xml
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error while initializing modules
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy: destroy module ...

I had checked my presence_xml configuration and check the opensips documentation and I can say that I have done what was instructed in the configuration instruction.  At first I was encountering segfault error, but now this error is now appearing
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

bay2x1
I have enabled the xcap_client module and the error was eliminated but encountered another stumbling block this is how my opensips.cfg configuration intergrating openxcap given all the needed modules has been loaded.

# ----- presence params -----                    enabled: openxcap support
/* uncomment the following lines if you want to enable presence */
modparam("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence", "server_address", "sip:presence@10.0.0.1")
modparam("presence", "fallback2db", 1)
modparam("presence", "clean_period",  30)

# -- xcap params --                              added: openxcap support
modparam("presence_xml", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 0)
modparam("presence_xml", "pidf_manipulation", 1)
modparam("presence_xml", "integrated_xcap_server", 1)

# -- rls params -- added: openxcap support
modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("rls", "server_address",         "sip:rls@10.0.0.1")
modparam("rls", "to_presence_code", 5)
modparam("rls", "integrated_xcap_server", 1)

modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua", "db_table", "pua")
*/

#-----------------xcap client -------------------------
modparam("xcap_client", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("xcap_client", "xcap_table", "xcaps")
modparam("xcap_client", "periodical_query", 0)

this is the error log. ERROR LOG

Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:mod_init: initializing module ...
Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:presence_xml:mod_init: copying xcap server list in share memory
Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod: failed to initialize module presence_xml
Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error while initializing modules
Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:destroy: destroy module ...



bay2x1 wrote
I have integrated openxcap on my config and opensips fails to run generating error log below....

Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init: Dialog module - initializing
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:mod_init: initializing module ...
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:presence_xml:mod_init: Can't bind xcap_client
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod: failed to initialize module presence_xml
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error while initializing modules
Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy: destroy module ...

I had checked my presence_xml configuration and check the opensips documentation and I can say that I have done what was instructed in the configuration instruction.  At first I was encountering segfault error, but now this error is now appearing
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

Bogdan-Andrei Iancu
Hi,

I think the error is self explanatory:

ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set

You need to set the "xcap_server" parameter for the presence_xml module.
See:
http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211

Regards,
Bogdan

bay2x1 wrote:

> I have enabled the xcap_client module and the error was eliminated but
> encountered another stumbling block this is how my opensips.cfg
> configuration intergrating openxcap given all the needed modules has been
> loaded.
>
> # ----- presence params -----                    enabled: openxcap support
> /* uncomment the following lines if you want to enable presence */
> modparam("presence", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence", "server_address", "sip:presence@10.0.0.1")
> modparam("presence", "fallback2db", 1)
> modparam("presence", "clean_period",  30)
>
> # -- xcap params --                              added: openxcap support
> modparam("presence_xml", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence_xml", "force_active", 0)
> modparam("presence_xml", "pidf_manipulation", 1)
> modparam("presence_xml", "integrated_xcap_server", 1)
>
> # -- rls params -- added: openxcap support
> modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
> modparam("rls", "to_presence_code", 5)
> modparam("rls", "integrated_xcap_server", 1)
>
> modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("pua", "db_table", "pua")
> */
>
> #-----------------xcap client -------------------------
> modparam("xcap_client", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("xcap_client", "xcap_table", "xcaps")
> modparam("xcap_client", "periodical_query", 0)
>
> this is the error log. ERROR LOG
>
> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:mod_init:
> initializing module ...
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:presence_xml:mod_init:
> copying xcap server list in share memory
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod: failed
> to initialize module presence_xml
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error while
> initializing modules
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:destroy:
> destroy module ...
>
>
>
>
> bay2x1 wrote:
>  
>> I have integrated openxcap on my config and opensips fails to run
>> generating error log below....
>>
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>> Dialog module - initializing
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:mod_init:
>> initializing module ...
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>> failed to initialize module presence_xml
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>> while initializing modules
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy:
>> destroy module ...
>>
>> I had checked my presence_xml configuration and check the opensips
>> documentation and I can say that I have done what was instructed in the
>> configuration instruction.  At first I was encountering segfault error,
>> but now this error is now appearing
>>
>>    
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

bay2x1
Base on my understanding I dont need to set the xcap_server parameter if I set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am using version 1.5


Bogdan-Andrei Iancu wrote
Hi,

I think the error is self explanatory:

ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set

You need to set the "xcap_server" parameter for the presence_xml module.
See:
http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211

Regards,
Bogdan

bay2x1 wrote:
> I have enabled the xcap_client module and the error was eliminated but
> encountered another stumbling block this is how my opensips.cfg
> configuration intergrating openxcap given all the needed modules has been
> loaded.
>
> # ----- presence params -----                    enabled: openxcap support
> /* uncomment the following lines if you want to enable presence */
> modparam("presence", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence", "server_address", "sip:presence@10.0.0.1")
> modparam("presence", "fallback2db", 1)
> modparam("presence", "clean_period",  30)
>
> # -- xcap params --                              added: openxcap support
> modparam("presence_xml", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence_xml", "force_active", 0)
> modparam("presence_xml", "pidf_manipulation", 1)
> modparam("presence_xml", "integrated_xcap_server", 1)
>
> # -- rls params -- added: openxcap support
> modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
> modparam("rls", "to_presence_code", 5)
> modparam("rls", "integrated_xcap_server", 1)
>
> modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("pua", "db_table", "pua")
> */
>
> #-----------------xcap client -------------------------
> modparam("xcap_client", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("xcap_client", "xcap_table", "xcaps")
> modparam("xcap_client", "periodical_query", 0)
>
> this is the error log. ERROR LOG
>
> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:mod_init:
> initializing module ...
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:presence_xml:mod_init:
> copying xcap server list in share memory
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod: failed
> to initialize module presence_xml
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error while
> initializing modules
> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:destroy:
> destroy module ...
>
>
>
>
> bay2x1 wrote:
>  
>> I have integrated openxcap on my config and opensips fails to run
>> generating error log below....
>>
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>> Dialog module - initializing
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:mod_init:
>> initializing module ...
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>> failed to initialize module presence_xml
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>> while initializing modules
>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy:
>> destroy module ...
>>
>> I had checked my presence_xml configuration and check the opensips
>> documentation and I can say that I have done what was instructed in the
>> configuration instruction.  At first I was encountering segfault error,
>> but now this error is now appearing
>>
>>    
>
>  


_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

Anca Vamanu-2
Hi,

I have tried with exactly your parameters and it worked ok.
You don't need to load the xcap_client module if you set
integrated_xcap_server module parameter in both presence_xml and rls.
Are you sure you trying to run with this config :) ?

regards,
Anca


bay2x1 wrote:

> Base on my understanding I dont need to set the xcap_server parameter if I
> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
> using version 1.5
>
>
>
> Bogdan-Andrei Iancu wrote:
>  
>> Hi,
>>
>> I think the error is self explanatory:
>>
>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>
>> You need to set the "xcap_server" parameter for the presence_xml module.
>> See:
>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>
>> Regards,
>> Bogdan
>>
>> bay2x1 wrote:
>>    
>>> I have enabled the xcap_client module and the error was eliminated but
>>> encountered another stumbling block this is how my opensips.cfg
>>> configuration intergrating openxcap given all the needed modules has been
>>> loaded.
>>>
>>> # ----- presence params -----                    enabled: openxcap
>>> support
>>> /* uncomment the following lines if you want to enable presence */
>>> modparam("presence", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>> modparam("presence", "fallback2db", 1)
>>> modparam("presence", "clean_period",  30)
>>>
>>> # -- xcap params --                              added: openxcap support
>>> modparam("presence_xml", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("presence_xml", "force_active", 0)
>>> modparam("presence_xml", "pidf_manipulation", 1)
>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>
>>> # -- rls params -- added: openxcap support
>>> modparam("rls", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>> modparam("rls", "to_presence_code", 5)
>>> modparam("rls", "integrated_xcap_server", 1)
>>>
>>> modparam("pua", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("pua", "db_table", "pua")
>>> */
>>>
>>> #-----------------xcap client -------------------------
>>> modparam("xcap_client", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("xcap_client", "xcap_table", "xcaps")
>>> modparam("xcap_client", "periodical_query", 0)
>>>
>>> this is the error log. ERROR LOG
>>>
>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:mod_init:
>>> initializing module ...
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>> ERROR:presence_xml:mod_init:
>>> copying xcap server list in share memory
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>> failed
>>> to initialize module presence_xml
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error
>>> while
>>> initializing modules
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:destroy:
>>> destroy module ...
>>>
>>>
>>>
>>>
>>> bay2x1 wrote:
>>>  
>>>      
>>>> I have integrated openxcap on my config and opensips fails to run
>>>> generating error log below....
>>>>
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>>>> Dialog module - initializing
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>> NOTICE:presence:mod_init:
>>>> initializing module ...
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>> failed to initialize module presence_xml
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>>>> while initializing modules
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy:
>>>> destroy module ...
>>>>
>>>> I had checked my presence_xml configuration and check the opensips
>>>> documentation and I can say that I have done what was instructed in the
>>>> configuration instruction.  At first I was encountering segfault error,
>>>> but now this error is now appearing
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

bay2x1
The code I am using is exactly the same as the one I have copied here.  I have disabled the xcap_client module and its parameters but I now encounter the following error:

Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the query returned no result
Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init: initializing module ...
Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:presence_xml:mod_init: Can't bind xcap_client
Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod: failed to initialize module presence_xml
Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error while initializing modules
Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy: destroy module ...



Anca Vamanu-2 wrote
Hi,

I have tried with exactly your parameters and it worked ok.
You don't need to load the xcap_client module if you set
integrated_xcap_server module parameter in both presence_xml and rls.
Are you sure you trying to run with this config :) ?

regards,
Anca


bay2x1 wrote:
> Base on my understanding I dont need to set the xcap_server parameter if I
> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
> using version 1.5
>
>
>
> Bogdan-Andrei Iancu wrote:
>  
>> Hi,
>>
>> I think the error is self explanatory:
>>
>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>
>> You need to set the "xcap_server" parameter for the presence_xml module.
>> See:
>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>
>> Regards,
>> Bogdan
>>
>> bay2x1 wrote:
>>    
>>> I have enabled the xcap_client module and the error was eliminated but
>>> encountered another stumbling block this is how my opensips.cfg
>>> configuration intergrating openxcap given all the needed modules has been
>>> loaded.
>>>
>>> # ----- presence params -----                    enabled: openxcap
>>> support
>>> /* uncomment the following lines if you want to enable presence */
>>> modparam("presence", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>> modparam("presence", "fallback2db", 1)
>>> modparam("presence", "clean_period",  30)
>>>
>>> # -- xcap params --                              added: openxcap support
>>> modparam("presence_xml", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("presence_xml", "force_active", 0)
>>> modparam("presence_xml", "pidf_manipulation", 1)
>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>
>>> # -- rls params -- added: openxcap support
>>> modparam("rls", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>> modparam("rls", "to_presence_code", 5)
>>> modparam("rls", "integrated_xcap_server", 1)
>>>
>>> modparam("pua", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("pua", "db_table", "pua")
>>> */
>>>
>>> #-----------------xcap client -------------------------
>>> modparam("xcap_client", "db_url",
>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>> modparam("xcap_client", "xcap_table", "xcaps")
>>> modparam("xcap_client", "periodical_query", 0)
>>>
>>> this is the error log. ERROR LOG
>>>
>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:mod_init:
>>> initializing module ...
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>> ERROR:presence_xml:mod_init:
>>> copying xcap server list in share memory
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>> failed
>>> to initialize module presence_xml
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error
>>> while
>>> initializing modules
>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: NOTICE:presence:destroy:
>>> destroy module ...
>>>
>>>
>>>
>>>
>>> bay2x1 wrote:
>>>  
>>>      
>>>> I have integrated openxcap on my config and opensips fails to run
>>>> generating error log below....
>>>>
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>>>> Dialog module - initializing
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>> NOTICE:presence:mod_init:
>>>> initializing module ...
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>> failed to initialize module presence_xml
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>>>> while initializing modules
>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: NOTICE:presence:destroy:
>>>> destroy module ...
>>>>
>>>> I had checked my presence_xml configuration and check the opensips
>>>> documentation and I can say that I have done what was instructed in the
>>>> configuration instruction.  At first I was encountering segfault error,
>>>> but now this error is now appearing
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

Anca Vamanu-2
What opensips version are you using? 1.5 or 1.4.4?

Anca

bay2x1 wrote:

> The code I am using is exactly the same as the one I have copied here.  I
> have disabled the xcap_client module and its parameters but I now encounter
> the following error:
>
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the
> query returned no result
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init:
> initializing module ...
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:presence_xml:mod_init:
> Can't bind xcap_client
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod: failed
> to initialize module presence_xml
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error while
> initializing modules
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy:
> destroy module ...
>
>
>
>
> Anca Vamanu-2 wrote:
>  
>> Hi,
>>
>> I have tried with exactly your parameters and it worked ok.
>> You don't need to load the xcap_client module if you set
>> integrated_xcap_server module parameter in both presence_xml and rls.
>> Are you sure you trying to run with this config :) ?
>>
>> regards,
>> Anca
>>
>>
>> bay2x1 wrote:
>>    
>>> Base on my understanding I dont need to set the xcap_server parameter if
>>> I
>>> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
>>> using version 1.5
>>>
>>>
>>>
>>> Bogdan-Andrei Iancu wrote:
>>>  
>>>      
>>>> Hi,
>>>>
>>>> I think the error is self explanatory:
>>>>
>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>
>>>> You need to set the "xcap_server" parameter for the presence_xml module.
>>>> See:
>>>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>>>
>>>> Regards,
>>>> Bogdan
>>>>
>>>> bay2x1 wrote:
>>>>    
>>>>        
>>>>> I have enabled the xcap_client module and the error was eliminated but
>>>>> encountered another stumbling block this is how my opensips.cfg
>>>>> configuration intergrating openxcap given all the needed modules has
>>>>> been
>>>>> loaded.
>>>>>
>>>>> # ----- presence params -----                    enabled: openxcap
>>>>> support
>>>>> /* uncomment the following lines if you want to enable presence */
>>>>> modparam("presence", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>>>> modparam("presence", "fallback2db", 1)
>>>>> modparam("presence", "clean_period",  30)
>>>>>
>>>>> # -- xcap params --                              added: openxcap
>>>>> support
>>>>> modparam("presence_xml", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("presence_xml", "force_active", 0)
>>>>> modparam("presence_xml", "pidf_manipulation", 1)
>>>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>>>
>>>>> # -- rls params -- added: openxcap support
>>>>> modparam("rls", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>>>> modparam("rls", "to_presence_code", 5)
>>>>> modparam("rls", "integrated_xcap_server", 1)
>>>>>
>>>>> modparam("pua", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("pua", "db_table", "pua")
>>>>> */
>>>>>
>>>>> #-----------------xcap client -------------------------
>>>>> modparam("xcap_client", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("xcap_client", "xcap_table", "xcaps")
>>>>> modparam("xcap_client", "periodical_query", 0)
>>>>>
>>>>> this is the error log. ERROR LOG
>>>>>
>>>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]:
>>>>> NOTICE:presence:mod_init:
>>>>> initializing module ...
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> ERROR:presence_xml:mod_init:
>>>>> copying xcap server list in share memory
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>>>> failed
>>>>> to initialize module presence_xml
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error
>>>>> while
>>>>> initializing modules
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> NOTICE:presence:destroy:
>>>>> destroy module ...
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> bay2x1 wrote:
>>>>>  
>>>>>      
>>>>>          
>>>>>> I have integrated openxcap on my config and opensips fails to run
>>>>>> generating error log below....
>>>>>>
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>>>>>> Dialog module - initializing
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> NOTICE:presence:mod_init:
>>>>>> initializing module ...
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>>>> failed to initialize module presence_xml
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>>>>>> while initializing modules
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> NOTICE:presence:destroy:
>>>>>> destroy module ...
>>>>>>
>>>>>> I had checked my presence_xml configuration and check the opensips
>>>>>> documentation and I can say that I have done what was instructed in
>>>>>> the
>>>>>> configuration instruction.  At first I was encountering segfault
>>>>>> error,
>>>>>> but now this error is now appearing
>>>>>>
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>  
>>>>>      
>>>>>          
>>>> _______________________________________________
>>>> Users mailing list
>>>> [hidden email]
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

bay2x1
I am using opensips 1.5
Anca Vamanu-2 wrote
What opensips version are you using? 1.5 or 1.4.4?

Anca

bay2x1 wrote:
> The code I am using is exactly the same as the one I have copied here.  I
> have disabled the xcap_client module and its parameters but I now encounter
> the following error:
>
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the
> query returned no result
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init:
> initializing module ...
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:presence_xml:mod_init:
> Can't bind xcap_client
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod: failed
> to initialize module presence_xml
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error while
> initializing modules
> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy:
> destroy module ...
>
>
>
>
> Anca Vamanu-2 wrote:
>  
>> Hi,
>>
>> I have tried with exactly your parameters and it worked ok.
>> You don't need to load the xcap_client module if you set
>> integrated_xcap_server module parameter in both presence_xml and rls.
>> Are you sure you trying to run with this config :) ?
>>
>> regards,
>> Anca
>>
>>
>> bay2x1 wrote:
>>    
>>> Base on my understanding I dont need to set the xcap_server parameter if
>>> I
>>> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
>>> using version 1.5
>>>
>>>
>>>
>>> Bogdan-Andrei Iancu wrote:
>>>  
>>>      
>>>> Hi,
>>>>
>>>> I think the error is self explanatory:
>>>>
>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>
>>>> You need to set the "xcap_server" parameter for the presence_xml module.
>>>> See:
>>>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>>>
>>>> Regards,
>>>> Bogdan
>>>>
>>>> bay2x1 wrote:
>>>>    
>>>>        
>>>>> I have enabled the xcap_client module and the error was eliminated but
>>>>> encountered another stumbling block this is how my opensips.cfg
>>>>> configuration intergrating openxcap given all the needed modules has
>>>>> been
>>>>> loaded.
>>>>>
>>>>> # ----- presence params -----                    enabled: openxcap
>>>>> support
>>>>> /* uncomment the following lines if you want to enable presence */
>>>>> modparam("presence", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>>>> modparam("presence", "fallback2db", 1)
>>>>> modparam("presence", "clean_period",  30)
>>>>>
>>>>> # -- xcap params --                              added: openxcap
>>>>> support
>>>>> modparam("presence_xml", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("presence_xml", "force_active", 0)
>>>>> modparam("presence_xml", "pidf_manipulation", 1)
>>>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>>>
>>>>> # -- rls params -- added: openxcap support
>>>>> modparam("rls", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>>>> modparam("rls", "to_presence_code", 5)
>>>>> modparam("rls", "integrated_xcap_server", 1)
>>>>>
>>>>> modparam("pua", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("pua", "db_table", "pua")
>>>>> */
>>>>>
>>>>> #-----------------xcap client -------------------------
>>>>> modparam("xcap_client", "db_url",
>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>> modparam("xcap_client", "xcap_table", "xcaps")
>>>>> modparam("xcap_client", "periodical_query", 0)
>>>>>
>>>>> this is the error log. ERROR LOG
>>>>>
>>>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]:
>>>>> NOTICE:presence:mod_init:
>>>>> initializing module ...
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> ERROR:presence_xml:mod_init:
>>>>> copying xcap server list in share memory
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>>>> failed
>>>>> to initialize module presence_xml
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main: error
>>>>> while
>>>>> initializing modules
>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>> NOTICE:presence:destroy:
>>>>> destroy module ...
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> bay2x1 wrote:
>>>>>  
>>>>>      
>>>>>          
>>>>>> I have integrated openxcap on my config and opensips fails to run
>>>>>> generating error log below....
>>>>>>
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: INFO:dialog:mod_init:
>>>>>> Dialog module - initializing
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> NOTICE:presence:mod_init:
>>>>>> initializing module ...
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>>>> failed to initialize module presence_xml
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main: error
>>>>>> while initializing modules
>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>> NOTICE:presence:destroy:
>>>>>> destroy module ...
>>>>>>
>>>>>> I had checked my presence_xml configuration and check the opensips
>>>>>> documentation and I can say that I have done what was instructed in
>>>>>> the
>>>>>> configuration instruction.  At first I was encountering segfault
>>>>>> error,
>>>>>> but now this error is now appearing
>>>>>>
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>  
>>>>>      
>>>>>          
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users@lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

Anca Vamanu-2
Hi,

I really don't know how to help you.
I have copied exactly your parameters:

# ----- presence params -----                    enabled: openxcap support
/* uncomment the following lines if you want to enable presence */
modparam("presence", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence", "server_address", "sip:presence@10.0.0.1")
modparam("presence", "fallback2db", 1)
modparam("presence", "clean_period",  30)

# -- xcap params --                              added: openxcap support
modparam("presence_xml", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 0)
modparam("presence_xml", "pidf_manipulation", 1)
modparam("presence_xml", "integrated_xcap_server", 1)

# -- rls params --                 added: openxcap support
modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("rls", "server_address",         "sip:rls@10.0.0.1")
modparam("rls", "to_presence_code", 5)
modparam("rls", "integrated_xcap_server", 1)

modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua", "db_table", "pua")


and it works.

Again I am asking: Are you sure you are running with this config?

regards,
Anca

bay2x1 wrote:

> I am using opensips 1.5
>
> Anca Vamanu-2 wrote:
>  
>> What opensips version are you using? 1.5 or 1.4.4?
>>
>> Anca
>>
>> bay2x1 wrote:
>>    
>>> The code I am using is exactly the same as the one I have copied here.  I
>>> have disabled the xcap_client module and its parameters but I now
>>> encounter
>>> the following error:
>>>
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the
>>> query returned no result
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init:
>>> initializing module ...
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]:
>>> ERROR:presence_xml:mod_init:
>>> Can't bind xcap_client
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod:
>>> failed
>>> to initialize module presence_xml
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error
>>> while
>>> initializing modules
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy:
>>> destroy module ...
>>>
>>>
>>>
>>>
>>> Anca Vamanu-2 wrote:
>>>  
>>>      
>>>> Hi,
>>>>
>>>> I have tried with exactly your parameters and it worked ok.
>>>> You don't need to load the xcap_client module if you set
>>>> integrated_xcap_server module parameter in both presence_xml and rls.
>>>> Are you sure you trying to run with this config :) ?
>>>>
>>>> regards,
>>>> Anca
>>>>
>>>>
>>>> bay2x1 wrote:
>>>>    
>>>>        
>>>>> Base on my understanding I dont need to set the xcap_server parameter
>>>>> if
>>>>> I
>>>>> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
>>>>> using version 1.5
>>>>>
>>>>>
>>>>>
>>>>> Bogdan-Andrei Iancu wrote:
>>>>>  
>>>>>      
>>>>>          
>>>>>> Hi,
>>>>>>
>>>>>> I think the error is self explanatory:
>>>>>>
>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>
>>>>>> You need to set the "xcap_server" parameter for the presence_xml
>>>>>> module.
>>>>>> See:
>>>>>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>>>>>
>>>>>> Regards,
>>>>>> Bogdan
>>>>>>
>>>>>> bay2x1 wrote:
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>>> I have enabled the xcap_client module and the error was eliminated
>>>>>>> but
>>>>>>> encountered another stumbling block this is how my opensips.cfg
>>>>>>> configuration intergrating openxcap given all the needed modules has
>>>>>>> been
>>>>>>> loaded.
>>>>>>>
>>>>>>> # ----- presence params -----                    enabled: openxcap
>>>>>>> support
>>>>>>> /* uncomment the following lines if you want to enable presence */
>>>>>>> modparam("presence", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>>>>>> modparam("presence", "fallback2db", 1)
>>>>>>> modparam("presence", "clean_period",  30)
>>>>>>>
>>>>>>> # -- xcap params --                              added: openxcap
>>>>>>> support
>>>>>>> modparam("presence_xml", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("presence_xml", "force_active", 0)
>>>>>>> modparam("presence_xml", "pidf_manipulation", 1)
>>>>>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>>>>>
>>>>>>> # -- rls params -- added: openxcap support
>>>>>>> modparam("rls", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>>>>>> modparam("rls", "to_presence_code", 5)
>>>>>>> modparam("rls", "integrated_xcap_server", 1)
>>>>>>>
>>>>>>> modparam("pua", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("pua", "db_table", "pua")
>>>>>>> */
>>>>>>>
>>>>>>> #-----------------xcap client -------------------------
>>>>>>> modparam("xcap_client", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("xcap_client", "xcap_table", "xcaps")
>>>>>>> modparam("xcap_client", "periodical_query", 0)
>>>>>>>
>>>>>>> this is the error log. ERROR LOG
>>>>>>>
>>>>>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]:
>>>>>>> NOTICE:presence:mod_init:
>>>>>>> initializing module ...
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> ERROR:presence_xml:mod_init:
>>>>>>> copying xcap server list in share memory
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>>>>>> failed
>>>>>>> to initialize module presence_xml
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main:
>>>>>>> error
>>>>>>> while
>>>>>>> initializing modules
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> NOTICE:presence:destroy:
>>>>>>> destroy module ...
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> bay2x1 wrote:
>>>>>>>  
>>>>>>>      
>>>>>>>          
>>>>>>>              
>>>>>>>> I have integrated openxcap on my config and opensips fails to run
>>>>>>>> generating error log below....
>>>>>>>>
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> INFO:dialog:mod_init:
>>>>>>>> Dialog module - initializing
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> NOTICE:presence:mod_init:
>>>>>>>> initializing module ...
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>>>>>> failed to initialize module presence_xml
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main:
>>>>>>>> error
>>>>>>>> while initializing modules
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> NOTICE:presence:destroy:
>>>>>>>> destroy module ...
>>>>>>>>
>>>>>>>> I had checked my presence_xml configuration and check the opensips
>>>>>>>> documentation and I can say that I have done what was instructed in
>>>>>>>> the
>>>>>>>> configuration instruction.  At first I was encountering segfault
>>>>>>>> error,
>>>>>>>> but now this error is now appearing
>>>>>>>>
>>>>>>>>    
>>>>>>>>        
>>>>>>>>            
>>>>>>>>                
>>>>>>>  
>>>>>>>      
>>>>>>>          
>>>>>>>              
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> [hidden email]
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>  
>>>>>      
>>>>>          
>>>> _______________________________________________
>>>> Users mailing list
>>>> [hidden email]
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

bay2x1
Yes I am using the latest opensips 1.5 version... and i am using this config and still encountering the same problem: can not bind xcap_client.  I have set integrated_xcap_server to 1 and I am wondering why is it looking for xcap_client.  Please look at how the modules are loaded I think this might be the problem.

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "mi_datagram.so"
loadmodule "uri_db.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "siptrace.so"          
loadmodule "mediaproxy.so"        
loadmodule "dialog.so"            
loadmodule "call_control.so"      

loadmodule "pua.so"
loadmodule "pua_mi.so"
loadmodule "presence.so"        
loadmodule "presence_xml.so"
loadmodule "presence_mwi.so"
loadmodule "presence_xcapdiff.so"
loadmodule "rls.so"

loadmodule "domain.so"
loadmodule "avpops.so"


Anca Vamanu-2 wrote
Hi,

I really don't know how to help you.
I have copied exactly your parameters:

# ----- presence params -----                    enabled: openxcap support
/* uncomment the following lines if you want to enable presence */
modparam("presence", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence", "server_address", "sip:presence@10.0.0.1")
modparam("presence", "fallback2db", 1)
modparam("presence", "clean_period",  30)

# -- xcap params --                              added: openxcap support
modparam("presence_xml", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 0)
modparam("presence_xml", "pidf_manipulation", 1)
modparam("presence_xml", "integrated_xcap_server", 1)

# -- rls params --                 added: openxcap support
modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("rls", "server_address",         "sip:rls@10.0.0.1")
modparam("rls", "to_presence_code", 5)
modparam("rls", "integrated_xcap_server", 1)

modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua", "db_table", "pua")


and it works.

Again I am asking: Are you sure you are running with this config?

regards,
Anca

bay2x1 wrote:
> I am using opensips 1.5
>
> Anca Vamanu-2 wrote:
>  
>> What opensips version are you using? 1.5 or 1.4.4?
>>
>> Anca
>>
>> bay2x1 wrote:
>>    
>>> The code I am using is exactly the same as the one I have copied here.  I
>>> have disabled the xcap_client module and its parameters but I now
>>> encounter
>>> the following error:
>>>
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the
>>> query returned no result
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init:
>>> initializing module ...
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]:
>>> ERROR:presence_xml:mod_init:
>>> Can't bind xcap_client
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod:
>>> failed
>>> to initialize module presence_xml
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error
>>> while
>>> initializing modules
>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy:
>>> destroy module ...
>>>
>>>
>>>
>>>
>>> Anca Vamanu-2 wrote:
>>>  
>>>      
>>>> Hi,
>>>>
>>>> I have tried with exactly your parameters and it worked ok.
>>>> You don't need to load the xcap_client module if you set
>>>> integrated_xcap_server module parameter in both presence_xml and rls.
>>>> Are you sure you trying to run with this config :) ?
>>>>
>>>> regards,
>>>> Anca
>>>>
>>>>
>>>> bay2x1 wrote:
>>>>    
>>>>        
>>>>> Base on my understanding I dont need to set the xcap_server parameter
>>>>> if
>>>>> I
>>>>> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
>>>>> using version 1.5
>>>>>
>>>>>
>>>>>
>>>>> Bogdan-Andrei Iancu wrote:
>>>>>  
>>>>>      
>>>>>          
>>>>>> Hi,
>>>>>>
>>>>>> I think the error is self explanatory:
>>>>>>
>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>
>>>>>> You need to set the "xcap_server" parameter for the presence_xml
>>>>>> module.
>>>>>> See:
>>>>>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>>>>>
>>>>>> Regards,
>>>>>> Bogdan
>>>>>>
>>>>>> bay2x1 wrote:
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>>> I have enabled the xcap_client module and the error was eliminated
>>>>>>> but
>>>>>>> encountered another stumbling block this is how my opensips.cfg
>>>>>>> configuration intergrating openxcap given all the needed modules has
>>>>>>> been
>>>>>>> loaded.
>>>>>>>
>>>>>>> # ----- presence params -----                    enabled: openxcap
>>>>>>> support
>>>>>>> /* uncomment the following lines if you want to enable presence */
>>>>>>> modparam("presence", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>>>>>> modparam("presence", "fallback2db", 1)
>>>>>>> modparam("presence", "clean_period",  30)
>>>>>>>
>>>>>>> # -- xcap params --                              added: openxcap
>>>>>>> support
>>>>>>> modparam("presence_xml", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("presence_xml", "force_active", 0)
>>>>>>> modparam("presence_xml", "pidf_manipulation", 1)
>>>>>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>>>>>
>>>>>>> # -- rls params -- added: openxcap support
>>>>>>> modparam("rls", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>>>>>> modparam("rls", "to_presence_code", 5)
>>>>>>> modparam("rls", "integrated_xcap_server", 1)
>>>>>>>
>>>>>>> modparam("pua", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("pua", "db_table", "pua")
>>>>>>> */
>>>>>>>
>>>>>>> #-----------------xcap client -------------------------
>>>>>>> modparam("xcap_client", "db_url",
>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>> modparam("xcap_client", "xcap_table", "xcaps")
>>>>>>> modparam("xcap_client", "periodical_query", 0)
>>>>>>>
>>>>>>> this is the error log. ERROR LOG
>>>>>>>
>>>>>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]:
>>>>>>> NOTICE:presence:mod_init:
>>>>>>> initializing module ...
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> ERROR:presence_xml:mod_init:
>>>>>>> copying xcap server list in share memory
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>>>>>> failed
>>>>>>> to initialize module presence_xml
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main:
>>>>>>> error
>>>>>>> while
>>>>>>> initializing modules
>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>> NOTICE:presence:destroy:
>>>>>>> destroy module ...
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> bay2x1 wrote:
>>>>>>>  
>>>>>>>      
>>>>>>>          
>>>>>>>              
>>>>>>>> I have integrated openxcap on my config and opensips fails to run
>>>>>>>> generating error log below....
>>>>>>>>
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> INFO:dialog:mod_init:
>>>>>>>> Dialog module - initializing
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> NOTICE:presence:mod_init:
>>>>>>>> initializing module ...
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>>>>>> failed to initialize module presence_xml
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main:
>>>>>>>> error
>>>>>>>> while initializing modules
>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>> NOTICE:presence:destroy:
>>>>>>>> destroy module ...
>>>>>>>>
>>>>>>>> I had checked my presence_xml configuration and check the opensips
>>>>>>>> documentation and I can say that I have done what was instructed in
>>>>>>>> the
>>>>>>>> configuration instruction.  At first I was encountering segfault
>>>>>>>> error,
>>>>>>>> but now this error is now appearing
>>>>>>>>
>>>>>>>>    
>>>>>>>>        
>>>>>>>>            
>>>>>>>>                
>>>>>>>  
>>>>>>>      
>>>>>>>          
>>>>>>>              
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users@lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>>    
>>>>>>        
>>>>>>            
>>>>>  
>>>>>      
>>>>>          
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users@lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>    
>>>>        
>>>  
>>>      
>> _______________________________________________
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    
>
>  


_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: Error on presence_xml

Anca Vamanu-2

No, nothing is wrong with the order of the modules.
Again, I have tested with your configuration and it works.
Please check that the configuration file you are using is the one that
you wish to use and from which you send excerpts.

Anca

bay2x1 wrote:

> Yes I am using the latest opensips 1.5 version... and i am using this config and still encountering the same problem: can not bind xcap_client.  I have set integrated_xcap_server to 1 and I am wondering why is it looking for xcap_client.  Please look at how the modules are loaded I think this might be the problem.
>
> /* uncomment next line for MySQL DB support */
> loadmodule "db_mysql.so"
> loadmodule "signaling.so"
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "mi_fifo.so"
> loadmodule "mi_datagram.so"
> loadmodule "uri_db.so"
> loadmodule "uri.so"
> loadmodule "xlog.so"
> loadmodule "acc.so"
> loadmodule "siptrace.so"          
> loadmodule "mediaproxy.so"        
> loadmodule "dialog.so"            
> loadmodule "call_control.so"      
>
> loadmodule "pua.so"
> loadmodule "pua_mi.so"
> loadmodule "presence.so"        
> loadmodule "presence_xml.so"
> loadmodule "presence_mwi.so"
> loadmodule "presence_xcapdiff.so"
> loadmodule "rls.so"
>
> loadmodule "domain.so"
> loadmodule "avpops.so"
>
>
>
> Hi,
>
> I really don't know how to help you.
> I have copied exactly your parameters:
>
> # ----- presence params -----                    enabled: openxcap support
> /* uncomment the following lines if you want to enable presence */
> modparam("presence", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence", "server_address", "sip:presence@10.0.0.1")
> modparam("presence", "fallback2db", 1)
> modparam("presence", "clean_period",  30)
>
> # -- xcap params --                              added: openxcap support
> modparam("presence_xml", "db_url",
> "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("presence_xml", "force_active", 0)
> modparam("presence_xml", "pidf_manipulation", 1)
> modparam("presence_xml", "integrated_xcap_server", 1)
>
> # -- rls params --                 added: openxcap support
> modparam("rls", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
> modparam("rls", "to_presence_code", 5)
> modparam("rls", "integrated_xcap_server", 1)
>
> modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("pua", "db_table", "pua")
>
>
> and it works.
>
> Again I am asking: Are you sure you are running with this config?
>
> regards,
> Anca
>
> bay2x1 wrote:
>  
>> I am using opensips 1.5
>>
>> Anca Vamanu-2 wrote:
>>  
>>    
>>> What opensips version are you using? 1.5 or 1.4.4?
>>>
>>> Anca
>>>
>>> bay2x1 wrote:
>>>    
>>>      
>>>> The code I am using is exactly the same as the one I have copied here.  I
>>>> have disabled the xcap_client module and its parameters but I now
>>>> encounter
>>>> the following error:
>>>>
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: INFO:pua:db_restore: the
>>>> query returned no result
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:mod_init:
>>>> initializing module ...
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]:
>>>> ERROR:presence_xml:mod_init:
>>>> Can't bind xcap_client
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:init_mod:
>>>> failed
>>>> to initialize module presence_xml
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: ERROR:core:main: error
>>>> while
>>>> initializing modules
>>>> Mar 14 08:04:22 ws16 /usr/sbin/opensips[3963]: NOTICE:presence:destroy:
>>>> destroy module ...
>>>>
>>>>
>>>>
>>>>
>>>> Anca Vamanu-2 wrote:
>>>>  
>>>>      
>>>>        
>>>>> Hi,
>>>>>
>>>>> I have tried with exactly your parameters and it worked ok.
>>>>> You don't need to load the xcap_client module if you set
>>>>> integrated_xcap_server module parameter in both presence_xml and rls.
>>>>> Are you sure you trying to run with this config :) ?
>>>>>
>>>>> regards,
>>>>> Anca
>>>>>
>>>>>
>>>>> bay2x1 wrote:
>>>>>    
>>>>>        
>>>>>          
>>>>>> Base on my understanding I dont need to set the xcap_server parameter
>>>>>> if
>>>>>> I
>>>>>> set the modparam("presence_xml", "integrated_xcap_server", 1)? BTW I am
>>>>>> using version 1.5
>>>>>>
>>>>>>
>>>>>>
>>>>>> Bogdan-Andrei Iancu wrote:
>>>>>>  
>>>>>>      
>>>>>>          
>>>>>>            
>>>>>>> Hi,
>>>>>>>
>>>>>>> I think the error is self explanatory:
>>>>>>>
>>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>>
>>>>>>> You need to set the "xcap_server" parameter for the presence_xml
>>>>>>> module.
>>>>>>> See:
>>>>>>> http://www.opensips.org/html/docs/modules/1.4.x/presence_xml.html#id228211
>>>>>>>
>>>>>>> Regards,
>>>>>>> Bogdan
>>>>>>>
>>>>>>> bay2x1 wrote:
>>>>>>>    
>>>>>>>        
>>>>>>>            
>>>>>>>              
>>>>>>>> I have enabled the xcap_client module and the error was eliminated
>>>>>>>> but
>>>>>>>> encountered another stumbling block this is how my opensips.cfg
>>>>>>>> configuration intergrating openxcap given all the needed modules has
>>>>>>>> been
>>>>>>>> loaded.
>>>>>>>>
>>>>>>>> # ----- presence params -----                    enabled: openxcap
>>>>>>>> support
>>>>>>>> /* uncomment the following lines if you want to enable presence */
>>>>>>>> modparam("presence", "db_url",
>>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>>> modparam("presence", "server_address", "sip:presence@10.0.0.1")
>>>>>>>> modparam("presence", "fallback2db", 1)
>>>>>>>> modparam("presence", "clean_period",  30)
>>>>>>>>
>>>>>>>> # -- xcap params --                              added: openxcap
>>>>>>>> support
>>>>>>>> modparam("presence_xml", "db_url",
>>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>>> modparam("presence_xml", "force_active", 0)
>>>>>>>> modparam("presence_xml", "pidf_manipulation", 1)
>>>>>>>> modparam("presence_xml", "integrated_xcap_server", 1)
>>>>>>>>
>>>>>>>> # -- rls params -- added: openxcap support
>>>>>>>> modparam("rls", "db_url",
>>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>>> modparam("rls", "server_address",         "sip:rls@10.0.0.1")
>>>>>>>> modparam("rls", "to_presence_code", 5)
>>>>>>>> modparam("rls", "integrated_xcap_server", 1)
>>>>>>>>
>>>>>>>> modparam("pua", "db_url",
>>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>>> modparam("pua", "db_table", "pua")
>>>>>>>> */
>>>>>>>>
>>>>>>>> #-----------------xcap client -------------------------
>>>>>>>> modparam("xcap_client", "db_url",
>>>>>>>> "mysql://opensips:opensipsrw@localhost/opensips")
>>>>>>>> modparam("xcap_client", "xcap_table", "xcaps")
>>>>>>>> modparam("xcap_client", "periodical_query", 0)
>>>>>>>>
>>>>>>>> this is the error log. ERROR LOG
>>>>>>>>
>>>>>>>> Mar 12 13:43:23 ws16 /usr/sbin/opensips[19514]:
>>>>>>>> NOTICE:presence:mod_init:
>>>>>>>> initializing module ...
>>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>>> ERROR:presence_xml:shm_copy_xcap_list: no xcap_server parameter set
>>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>>> ERROR:presence_xml:mod_init:
>>>>>>>> copying xcap server list in share memory
>>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:init_mod:
>>>>>>>> failed
>>>>>>>> to initialize module presence_xml
>>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]: ERROR:core:main:
>>>>>>>> error
>>>>>>>> while
>>>>>>>> initializing modules
>>>>>>>> Mar 12 13:43:24 ws16 /usr/sbin/opensips[19514]:
>>>>>>>> NOTICE:presence:destroy:
>>>>>>>> destroy module ...
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> bay2x1 wrote:
>>>>>>>>  
>>>>>>>>      
>>>>>>>>          
>>>>>>>>              
>>>>>>>>                
>>>>>>>>> I have integrated openxcap on my config and opensips fails to run
>>>>>>>>> generating error log below....
>>>>>>>>>
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>>> INFO:dialog:mod_init:
>>>>>>>>> Dialog module - initializing
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>>> NOTICE:presence:mod_init:
>>>>>>>>> initializing module ...
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>>> ERROR:presence_xml:mod_init: Can't bind xcap_client
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:init_mod:
>>>>>>>>> failed to initialize module presence_xml
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]: ERROR:core:main:
>>>>>>>>> error
>>>>>>>>> while initializing modules
>>>>>>>>> Mar 12 10:57:10 ws16 /usr/sbin/opensips[14469]:
>>>>>>>>> NOTICE:presence:destroy:
>>>>>>>>> destroy module ...
>>>>>>>>>
>>>>>>>>> I had checked my presence_xml configuration and check the opensips
>>>>>>>>> documentation and I can say that I have done what was instructed in
>>>>>>>>> the
>>>>>>>>> configuration instruction.  At first I was encountering segfault
>>>>>>>>> error,
>>>>>>>>> but now this error is now appearing
>>>>>>>>>
>>>>>>>>>    
>>>>>>>>>        
>>>>>>>>>            
>>>>>>>>>                
>>>>>>>>>                  
>>>>>>>>  
>>>>>>>>      
>>>>>>>>          
>>>>>>>>              
>>>>>>>>                
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> [hidden email]
>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>>
>>>>>>>
>>>>>>>    
>>>>>>>        
>>>>>>>            
>>>>>>>              
>>>>>>  
>>>>>>      
>>>>>>          
>>>>>>            
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> [hidden email]
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>>    
>>>>>        
>>>>>          
>>>>  
>>>>      
>>>>        
>>> _______________________________________________
>>> Users mailing list
>>> [hidden email]
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>    
>>>      
>>  
>>    
>
>
> _______________________________________________
> Users mailing list
> [hidden email]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users