How to make sips call by opensips?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

How to make sips call by opensips?

doolin wu
Dear Kamailio users,
Opensips 1.4.0 has been installed in my linux server with TLS enabled.
I am confusing with the scenerio of how to use SIPS/TLS to make security VoIP by Opensips.
I got the information like following from console after run opensips 1.4.0 with TLS enabled.
 
Listening on
             udp: 192.168.1.11 [192.168.1.11]:5060
             tcp: 192.168.1.11 [192.168.1.11]:5060
             tls: 192.168.1.11 [192.168.1.11]:5061
Aliases:
             tls: wavehost:5061
             tcp: wavehost:5060
             udp: wavehost:5060
 
As RFC3261 said, 5061 is default port for SIP. So, there are two ports here after TLS enabled. My question is how to configure my UA to use the SIP server?
In the other word, how to use SIP server with TLS enabled? My UA is SJphone 1.6 and XLite 3.0, seems they doesn't support SIPs/TLS. Is there any open source SIP UA which support TLS availiable ?
 
Best regards,
Steven Wu


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: How to make sips call by opensips?

doolin wu

Dear opensips users,
Opensips 1.4.0 has been installed in my linux server with TLS enabled.
I am confusing with the scenerio of how to use SIPS/TLS to make security VoIP by Opensips.
I got the information like following from console after run opensips 1.4.0 with TLS enabled.
 
Listening on
             udp: 192.168.1.11 [192.168.1.11]:5060
             tcp: 192.168.1.11 [192.168.1.11]:5060
             tls: 192.168.1.11 [192.168.1.11]:5061
Aliases:
             tls: wavehost:5061
             tcp: wavehost:5060
             udp: wavehost:5060
 
As RFC3261 said, 5061 is default port for SIP. So, there are two ports here after TLS enabled. My question is how to configure my UA to use the SIP server?
In the other word, how to use SIP server with TLS enabled? My UA is SJphone 1.6 and XLite 3.0, seems they doesn't support SIPs/TLS. Is there any open source SIP UA which support TLS availiable ?
 
Best regards,
Steven Wu



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: How to make sips call by opensips?

Bogdan-Andrei Iancu
Hi Steven,


doolin wu wrote:

>
>     Dear opensips users,
>     Opensips 1.4.0 has been installed in my linux server with TLS enabled.
>     I am confusing with the scenerio of how to use SIPS/TLS to make
>     security VoIP by Opensips.
>     I got the information like following from console after
>     run opensips 1.4.0 with TLS enabled.
>      
>     Listening on
>                  udp: 192.168.1.11 [192.168.1.11]:5060
>                  tcp: 192.168.1.11 [192.168.1.11]:5060
>                  tls: 192.168.1.11 [192.168.1.11]:5061
>     Aliases:
>                  tls: wavehost:5061
>                  tcp: wavehost:5060
>                  udp: wavehost:5060
>
OpenSIPS listens on multiple interfaces using multiple protos.

In your case, it listen for TLS traffic on 5051, but also for TCP and
UDP traffic on 5060.
>
>      
>     As RFC3261 said, 5061 is default port for SIP.
>
Correct
>
>     So, there are two ports here after TLS enabled. My question is how
>     to configure my UA to use the SIP server?
>
Point your client to wavehost:5061 for TLS - but be sure you instruct
the client to user TLS.
>
>     In the other word, how to use SIP server with TLS enabled? My UA
>     is SJphone 1.6 and XLite 3.0, seems they doesn't support SIPs/TLS.
>     Is there any open source SIP UA which support TLS availiable ?
>
minisip ?

Regards,
Bogdan

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users