OT: Re: OpenSip SIP, SIP-I e SIP-T

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

OT: Re: OpenSip SIP, SIP-I e SIP-T

Brett Nemeroff
Alex,
CIC's arn't bearer details, they are originating carrier details. TCIC
is bearer. Typically used for intercarrier compensation in CABS
billing. :)

On Thu, Feb 19, 2009 at 1:33 PM, Alex Balashov
<[hidden email]> wrote:

> See:
>
> http://tools.ietf.org/html/draft-jfp-sip-isup-header-00
>
> Grep for "CIC" / "cic".
>
> Alex Balashov wrote:
>
>> Any standard ISUP attribute has a corresponding map into SIP-T.  So, yes,
>> any bearer-related information is going to be in there as well.
>>
>> Brett Nemeroff wrote:
>>
>>> One question that I'm not sure of.. Are there any extensions in epru
>>> SIP-T that specify remote interface to use, such as used in
>>> H.248/Megaco? ie: dial 123 on TCIC 000010012
>>> -Brett
>>>
>>>
>>> On Thu, Feb 19, 2009 at 11:27 AM, Alex Balashov
>>> <[hidden email]> wrote:
>>>>
>>>> That is accurate.
>>>>
>>>> Brett Nemeroff wrote:
>>>>
>>>>> From what I understand about SIP-T it's SIP + ISUP params in the
>>>>> message. The required bits such as RURI and SDP all work as expected.
>>>>>
>>>>> Group, feel free to correct me there. Depending on your specific setup
>>>>> and network architecture, it should work. However, you may not be able
>>>>> to do anything with the ISUP components of the messaging.
>>>>>
>>>>> -Brett
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Feb 19, 2009 at 11:14 AM, Daviramos Roussenq Fortunato
>>>>> <[hidden email]> wrote:
>>>>>>
>>>>>> Hi Alex.
>>>>>>
>>>>>> If a different protocol is not to say that you can connect directly to
>>>>>> Asterisk and will work, just taking the resources of ISUP?
>>>>>>
>>>>>> SIP-T is not talking with SIP protocol are different, after all SIP-T
>>>>>> carries information that the SIP can not interpret.
>>>>>>
>>>>>> The Problem is the following I get a SIP-T trunk and Asterisk to
>>>>>> deliver
>>>>>> precise, how best to do.
>>>>>>
>>>>>> 2009/2/19 Alex Balashov <[hidden email]>
>>>>>>>
>>>>>>> Not possible, Asterisk doesn't understand SIP-T.
>>>>>>>
>>>>>>> What do you mean by that, anyway?  Only a device that supports ISUP
>>>>>>> interworking will support SIP-T.
>>>>>>>
>>>>>>> Secondly, as is often repeated here, SIP-T is a specification for a
>>>>>>> _PAYLOAD_ - an extension - of SIP.  It is not a different protocol.
>>>>>>>
>>>>>>> Daviramos Roussenq Fortunato wrote:
>>>>>>>
>>>>>>>> Hi List.
>>>>>>>>
>>>>>>>>  I have a trunk SIP-T must deliver it to the Asterisk in SIP. The
>>>>>>>> Opens
>>>>>>>> is that?
>>>>>>>> How should be my opensip.cfg?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> [hidden email]
>>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>>
>>>>>>> --
>>>>>>> Alex Balashov
>>>>>>> Evariste Systems
>>>>>>> Web    : http://www.evaristesys.com/
>>>>>>> Tel    : (+1) (678) 954-0670
>>>>>>> Direct : (+1) (678) 954-0671
>>>>>>> Mobile : (+1) (678) 237-1775
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> [hidden email]
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> [hidden email]
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>> --
>>>> Alex Balashov
>>>> Evariste Systems
>>>> Web    : http://www.evaristesys.com/
>>>> Tel    : (+1) (678) 954-0670
>>>> Direct : (+1) (678) 954-0671
>>>> Mobile : (+1) (678) 237-1775
>>>>
>>
>>
>
>
> --
> Alex Balashov
> Evariste Systems
> Web    : http://www.evaristesys.com/
> Tel    : (+1) (678) 954-0670
> Direct : (+1) (678) 954-0671
> Mobile : (+1) (678) 237-1775
>

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users