OpenXcap

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

OpenXcap

Michael Ciupka-2
Hello,

IMSCore and opensips run on my local machine, now i install openxcap, it run also but the communication with the opensips and openxcap dont work.

you see a small tutorial on the button of this page:
http://openxcap.org/wiki/Installation

can my someone explain how to configure the opensips.cfg with the files from the page.
when i read the page right i think i must include the main but then i get errors when i start opensips (etc/init.d/opensips start)

my opensips.cfg:

####### Global Parameters #########

debug=3
log_stderror=yes
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/etc/opensips/tls/user/user-calist.pem"


port=5065

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.2.5:5065
alias=presence.open-ims.test:5065
#alias=open-ims.test:5065
#alias=scscf.open-ims.test:5065
#alias=presence-server.open-ims.test:5065

####### Modules Section ########

#set module path
mpath="/usr/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri_db.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"

#loadmodule "mi_datagram.so"
#loadmodule "mysql.so"
#loadmodule "presence_mwi.so"
#loadmodule "presence_xcapdiff.so"
#loadmodule "pua.so"
#loadmodule "pua_mi.so"
#loadmodule "rls.so"



/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "presence.so"
loadmodule "presence_xml.so"


# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)


# ----- usrloc params -----
#modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
modparam("usrloc", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")


# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
   in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")


# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)


# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")


# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
modparam("alias_db", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")


# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
modparam("domain", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")
modparam("domain", "db_mode", 1)   # Use caching


# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)


# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:192.168.2.6:5060")


####### Routing Logic ########

# main request routing logic

route{

        # Testlog
        log(1, "irgendwas kommt beim Presence Server an \n");

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        };

        if (msg:len >=  2048 ) {
                sl_send_reply("513", "Message too big");
                exit;
        };

       
       
        #if (has_totag()) {
        # # sequential request withing a dialog should
        # # take the path determined by record-routing
        # if (loose_route()) {
        # if (is_method("BYE")) {
        # setflag(1); # do accouting ...
        # setflag(3); # ... even if the transaction fails
        # }
        # route(1);
        # } else {
        # /* uncomment the following lines if you want to enable presence */
        # if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
        # # in-dialog subscribe requests
        # route(2);
        # exit;
        # }
        # if ( is_method("ACK") ) {
        # if ( t_check_trans() ) {
        # # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
        # t_relay();
        # exit;
        # } else {
        # # ACK without matching transaction ... ignore and discard.\n");
        # exit;
        # }
        # }
        # sl_send_reply("404","Not here");
        # }
        # exit;
        #}
       

        #initial requests

        # CANCEL processing
        if (is_method("CANCEL"))
        {
                if (t_check_trans())
                        t_relay();
                exit;
        }

        t_check_trans();

        # authenticate if from local subscriber (uncomment to enable auth)
        ##if (!(method=="REGISTER") && from_uri==myself)
        ##{
        ## if (!proxy_authorize("", "subscriber")) {
        ## proxy_challenge("", "0");
        ## exit;
        ## }
        ## if (!check_from()) {
        ## sl_send_reply("403","Forbidden auth ID");
        ## exit;
        ## }
        ##
        ## consume_credentials();
        ## # caller authenticated
        ##}

        # record routing
        if (!is_method("REGISTER|MESSAGE"))
                record_route();

        # account only INVITEs
        if (is_method("INVITE")) {
                setflag(1); # do accouting
        }

        #if (!uri==myself)
        /* replace with following line if multi-domain support is used */
        ##if (!is_uri_host_local())
        #{
        # append_hf("P-hint: outbound\r\n");
                # if you have some interdomain connections via TLS
                ##if($rd=="tls_domain1.net") {
                ## t_relay("tls:domain1.net");
                ## exit;
                ##} else if($rd=="tls_domain2.net") {
                ## t_relay("tls:domain2.net");
                ## exit;
                ##}
        # route(1);
        #}

        # requests for my domain

        /* uncomment this if you want to enable presence server
           and comment the next 'if' block
           NOTE: uncomment also the definition of route[2] from  below */
        if( is_method("PUBLISH|SUBSCRIBE"))
        {
                        route(2);
        }
        else
        {
                log(1, "kein publish oder subscribe \n");
        }

        ##if (is_method("PUBLISH"))
        ##{
        ## sl_send_reply("503", "Service Unavailable");
        ## exit;
        ##}
       

        if (is_method("REGISTER"))
        {
                # authenticate the REGISTER requests (uncomment to enable auth)
                ##if (!www_authorize("", "subscriber"))
                ##{
                ## www_challenge("", "0");
                ## exit;
                ##}
                ##
                ##if (!check_to())
                ##{
                ## sl_send_reply("403","Forbidden auth ID");
                ## exit;
                ##}

                if (!save("location"))
                        sl_reply_error();

                exit;
        }

        if ($rU==NULL) {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }

        # apply DB based aliases (uncomment to enable)
        ##alias_db_lookup("dbaliases");

        if (!lookup("location")) {
                switch ($retcode) {
                        case -1:
                        case -3:
                                t_newtran();
                                t_reply("404", "Not Found");
                                exit;
                        case -2:
                                sl_send_reply("405", "Method Not Allowed");
                                exit;
                }
        }

        # when routing via usrloc, log the missed calls also
        setflag(2);

        route(1);
}


route[1] {
        # for INVITEs enable some additional helper routes
        if (is_method("INVITE")) {
                t_on_branch("2");
                t_on_reply("2");
                t_on_failure("1");
        }

        if (!t_relay()) {
                sl_reply_error();
        };
        exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
route[2]
{
        log(1, "Presence Route [2] \n");


        if (!t_newtran())
        {
                sl_reply_error();
                exit;
        };

        if(is_method("PUBLISH"))
        {
                handle_publish();
                #t_release();
        }
        else
        if( is_method("SUBSCRIBE"))
        {
                handle_subscribe();
                #t_release();
        }

        exit;
}


branch_route[2] {
        xlog("new branch at $ru\n");
}


onreply_route[2] {
        xlog("incoming reply\n");
}


failure_route[1] {
        if (t_was_cancelled()) {
                exit;
        }

        # uncomment the following lines if you want to block client
        # redirect based on 3xx replies.
        ##if (t_check_status("3[0-9][0-9]")) {
        ##t_reply("404","Not found");
        ## exit;
        ##}

        # uncomment the following lines if you want to redirect the failed
        # calls to a different new destination
        ##if (t_check_status("486|408")) {
        ## sethostport("192.168.2.100:5060");
        ## append_branch();
        ## # do not set the missed call flag again
        ## t_relay();
        ##}
}

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users