Problems with Siptrace module and Siptrace Tool of Opensips-cp

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Problems with Siptrace module and Siptrace Tool of Opensips-cp

mmarzuola

Anyone can help me?

<Hi all.
<I'm trying to use the Sip Trace tool of Opensips Control Panel.
<I would only filter the traces of some users, and reading the siptrace module <documentation and of the related tool, I have noticed that this can be done using the <parameter traced_user_avp of the siptrace module and the field Traced User of the Sip <Trace tool.
<By controlling the table sip_trace in the database I have noticed two things:
<1) some sip messages are stored twice.
<2) not all messages have a value in the traced_user column.
<
<This is the opensips.cfg:

####### Global Parameters #########

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"


port=5060

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available) */
listen=udp:10.10.45.146:5060


####### Modules Section ########

#set module path
mpath="/usr/local/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri_db.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "siptrace.so"
loadmodule "avpops.so"

/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)

# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)


# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
   in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")


# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc", "log_extra", "caller_id=$fu;callee_id=$ru;destination=$rd")
modparam("acc", "db_extra", "caller_id=$fu;callee_id=$ru;destination=$rd")

# ----- usrloc params -----
#modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
modparam("usrloc", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")


# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
        "mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")


# ----- siptrace params -----
modparam("siptrace", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "traced_user_avp", "$avp(s:user)")

# -----xlog params -----
modparam("xlog", "buf_size", 4096)
modparam("xlog", "force_color", 0)

# -----avpops params -----
modparam("avpops", "avp_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("avpops","avp_table","usr_preferences")

####### Routing Logic ########


# main request routing logic

route{
        sip_trace();
        $avp(s:user)=$fu;
        xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");

        if (!mf_process_maxfwd_header("10")) {
                xlog("L_INFO", "Too many hops\n");
                sl_send_reply("483","Too Many Hops");
                exit;
        }

        if (has_totag()) {
                # sequential request withing a dialog should
                # take the path determined by record-routing
                if (loose_route()) {
                        if (is_method("BYE")) {

                                setflag(1); # do accounting ...
                                setflag(3); # ... even if the transaction fails

                        }
                        route(1);
                } else {
                        /* uncomment the following lines if you want to enable presence */
                        ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
                        ##      # in-dialog subscribe requests
                        ##      route(2);
                        ##      exit;
                        ##}
                        if ( is_method("ACK") ) {
                                if ( t_check_trans() ) {
                                        # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
                                        t_relay();
                                        exit;
                                } else {
                                        # ACK without matching transaction ... ignore and discard.\n");
                                        exit;
                                }
                        }
                        sl_send_reply("404","Not here");
                }
                exit;
        }

        #initial requests

        # CANCEL processing
        if (is_method("CANCEL"))
        {
                if (t_check_trans())
                        t_relay();
                exit;
        }

        t_check_trans();

        # authenticate if from local subscriber (uncomment to enable auth)
        if (!(method=="REGISTER") && from_uri==myself)
                {
                if (!proxy_authorize("10.10.45.146", "subscriber")) {
                        proxy_challenge("10.10.45.146", "0");
                        exit;
                        }
                if (!check_from()) {
                        sl_send_reply("403","Forbidden auth ID");
                        exit;
                        }

                consume_credentials();
                # caller authenticated
                }

        # record routing
        if (!is_method("REGISTER|MESSAGE"))
                xlog("L_INFO", "Recording Route info\n");
                record_route();

        # account only INVITEs
        if (is_method("INVITE")) {
                xlog("L_INFO", "Method is an INVITE\n");
                setflag(1); # do accounting
        }
        if (!uri==myself)
        /* replace with following line if multi-domain support is used */
        ##if (!is_uri_host_local())
        {
                append_hf("P-hint: outbound\r\n");
                # if you have some interdomain connections via TLS
                ##if($rd=="tls_domain1.net") {
                ##      t_relay("tls:domain1.net");
                ##      exit;
                ##} else if($rd=="tls_domain2.net") {
                ##      t_relay("tls:domain2.net");
                ##      exit;
                ##}
                route(1);
        }

        # requests for my domain

        /* uncomment this if you want to enable presence server
           and comment the next 'if' block
           NOTE: uncomment also the definition of route[2] from  below */
        ##if( is_method("PUBLISH|SUBSCRIBE"))
        ##              route(2);

        if (is_method("PUBLISH"))
        {
                sl_send_reply("503", "Service Unavailable");
                exit;
        }


        if (is_method("REGISTER"))
        {
                xlog("L_INFO", "Method is an REGISTER\n");
                # authenticate the REGISTER requests (uncomment to enable auth)
                if (!www_authorize("10.10.45.146", "subscriber"))
                        {
                        www_challenge("10.10.45.146", "0");
                        exit;
                        }

                if (!check_to())
                        {
                        sl_send_reply("403","Forbidden auth ID");
                        exit;
                        }

                if (!save("location"))
                        sl_reply_error();

                exit;
        }

        if ($rU==NULL) {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }

        # apply DB based aliases (uncomment to enable)
        ##alias_db_lookup("dbaliases");

        if (!lookup("location")) {
                switch ($retcode) {
                        case -1:
                        case -3:
                                t_newtran();
                                t_reply("404", "Not Found");
                                exit;
                        case -2:
                                sl_send_reply("405", "Method Not Allowed");
                                exit;
                }
        }

        # when routing via usrloc, log the missed calls also
        setflag(2);

        route(1);
}


route[1] {
        # for INVITEs enable some additional helper routes
        if (is_method("INVITE")) {
                t_on_branch("2");
                t_on_reply("2");
                t_on_failure("1");
        }

        if (!t_relay()) {
                sl_reply_error();
        };
        exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
##route[2]
##{
##      if (!t_newtran())
##      {
##              sl_reply_error();
##              exit;
##      };
##
##      if(is_method("PUBLISH"))
##      {
##              handle_publish();
##              t_release();
##      }
##      else
##      if( is_method("SUBSCRIBE"))
##      {
##              handle_subscribe();
##              t_release();
##      }
##
##      exit;
##}


branch_route[2] {
        xlog("new branch at $ru\n");
}


onreply_route[2] {
        sip_trace();
        xlog("incoming reply\n");
}


failure_route[1] {
        if (t_was_cancelled()) {
                exit;
        }

        # uncomment the following lines if you want to block client
        # redirect based on 3xx replies.
        ##if (t_check_status("3[0-9][0-9]")) {
        ##t_reply("404","Not found");
        ##      exit;
        ##}

        # uncomment the following lines if you want to redirect the failed
        # calls to a different new destination
        ##if (t_check_status("486|408")) {
        ##      sethostport("192.168.2.100:5060");
        ##      append_branch();
        ##      # do not set the missed call flag again
        ##      t_relay();
        ##}
}

There is some error in the configuration?

Thank you in advance.

Marzuola Matteo




----------------------------------------------------------------------------
Vuoi essere presente online?
Vuoi dare voce alla tua attivita`?
Acquista un dominio su domini.interfree.it.
A partire da 18,59 euro
----------------------------------------------------------------------------


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users