call a standard phone and mobile at the same time

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

call a standard phone and mobile at the same time

Engineer voip
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Vlad Paiu
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Engineer voip
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

osiris123d
Can you explain in more detail what you are trying to do?  

On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Engineer voip
Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px"> 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({&#39;rating&#39;:{&#39;value&#39;:-1,&#39;weight&#39;:-1},&#39;flags&#39;:{&#39;shopping&#39;:null,&#39;social&#39;:null,&#39;news&#39;:null,&#39;it&#39;:null,&#39;corporate&#39;:null,&#39;pornography&#39;:null,&#39;violence&#39;:null,&#39;gambling&#39;:null,&#39;drugs&#39;:null,&#39;illegal&#39;:null},&#39;single&#39;:true,&#39;ttl&#39;:null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Adrian Georgescu
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px"> 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users<span onmouseout="cancel = false; window.setTimeout(WRCHideContent, 1000); clearTimeout(showTimer);" onmouseover=" var self = this; showTimer = window.setTimeout(function(){WRCShowContent({'rating':{'value':-1,'weight':-1},'flags':{'shopping':null,'social':null,'news':null,'it':null,'corporate':null,'pornography':null,'violence':null,'gambling':null,'drugs':null,'illegal':null},'single':true,'ttl':null}, self.className)},600);" class="wrc0" style="padding-right:16px;width:16px;height:16px">




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

S. Rosenberg

If you disable voicemail on the mobile phone through the carrier then you should get a busy signal from the carrier, if you also disable call waiting then you should also get busy a busy signal from the carrier, its not really required if you don't mind being disturbed by the beep , this might not always be a solution because you loose voicemail and call waiting on your phone.

Another solution might be to send the call through a Asterisk server and use the amd (answering machine detection) function.

On Oct 8, 2012 11:17 PM, "Adrian Georgescu" <[hidden email]> wrote:
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Adrian Georgescu
You cannot control the behavior of the GSM operators. They may decide to play a prompt and practically answer the call without returning any code when the target device is out of coverage, voicemail box may kick in or not, roaming or other scenarios you are not even aware about.  If instead of a response code, you end-up being connected or in early media, OpenSIPS cannot retarget the call in all situations. Thinks work random and fail for unknown reasons due to un-deterministic  behavior of the GSM operators involved.

Adrian

On Oct 9, 2012, at 2:40 PM, Schneur Rosenberg wrote:

If you disable voicemail on the mobile phone through the carrier then you should get a busy signal from the carrier, if you also disable call waiting then you should also get busy a busy signal from the carrier, its not really required if you don't mind being disturbed by the beep , this might not always be a solution because you loose voicemail and call waiting on your phone.

Another solution might be to send the call through a Asterisk server and use the amd (answering machine detection) function.

On Oct 8, 2012 11:17 PM, "Adrian Georgescu" <[hidden email]> wrote:
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

S. Rosenberg

That's true but from my experience it worked for me with a few carriers, of course every provider might treat it differently, even those that played a message did not actually pick up the call it was done with early media.

On Oct 9, 2012 2:55 PM, "Adrian Georgescu" <[hidden email]> wrote:
You cannot control the behavior of the GSM operators. They may decide to play a prompt and practically answer the call without returning any code when the target device is out of coverage, voicemail box may kick in or not, roaming or other scenarios you are not even aware about.  If instead of a response code, you end-up being connected or in early media, OpenSIPS cannot retarget the call in all situations. Thinks work random and fail for unknown reasons due to un-deterministic  behavior of the GSM operators involved.

Adrian

On Oct 9, 2012, at 2:40 PM, Schneur Rosenberg wrote:

If you disable voicemail on the mobile phone through the carrier then you should get a busy signal from the carrier, if you also disable call waiting then you should also get busy a busy signal from the carrier, its not really required if you don't mind being disturbed by the beep , this might not always be a solution because you loose voicemail and call waiting on your phone.

Another solution might be to send the call through a Asterisk server and use the amd (answering machine detection) function.

On Oct 8, 2012 11:17 PM, "Adrian Georgescu" <[hidden email]> wrote:
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Engineer voip
Hi,
Thank you all
 But i thought to do this by hanging up the call of mobile after some time if the mobile phone does not respond
Is opensips can do that?
thank you for your help

2012/10/9 Schneur Rosenberg <[hidden email]>

That's true but from my experience it worked for me with a few carriers, of course every provider might treat it differently, even those that played a message did not actually pick up the call it was done with early media.

On Oct 9, 2012 2:55 PM, "Adrian Georgescu" <[hidden email]> wrote:
You cannot control the behavior of the GSM operators. They may decide to play a prompt and practically answer the call without returning any code when the target device is out of coverage, voicemail box may kick in or not, roaming or other scenarios you are not even aware about.  If instead of a response code, you end-up being connected or in early media, OpenSIPS cannot retarget the call in all situations. Thinks work random and fail for unknown reasons due to un-deterministic  behavior of the GSM operators involved.

Adrian

On Oct 9, 2012, at 2:40 PM, Schneur Rosenberg wrote:

If you disable voicemail on the mobile phone through the carrier then you should get a busy signal from the carrier, if you also disable call waiting then you should also get busy a busy signal from the carrier, its not really required if you don't mind being disturbed by the beep , this might not always be a solution because you loose voicemail and call waiting on your phone.

Another solution might be to send the call through a Asterisk server and use the amd (answering machine detection) function.

On Oct 8, 2012 11:17 PM, "Adrian Georgescu" <[hidden email]> wrote:
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: call a standard phone and mobile at the same time

Muhammad Shahzad
RTFM dude!


Thank you.


On Thu, Oct 11, 2012 at 6:23 PM, Engineer voip <[hidden email]> wrote:
Hi,
Thank you all
 But i thought to do this by hanging up the call of mobile after some time if the mobile phone does not respond
Is opensips can do that?
thank you for your help

2012/10/9 Schneur Rosenberg <[hidden email]>

That's true but from my experience it worked for me with a few carriers, of course every provider might treat it differently, even those that played a message did not actually pick up the call it was done with early media.

On Oct 9, 2012 2:55 PM, "Adrian Georgescu" <[hidden email]> wrote:
You cannot control the behavior of the GSM operators. They may decide to play a prompt and practically answer the call without returning any code when the target device is out of coverage, voicemail box may kick in or not, roaming or other scenarios you are not even aware about.  If instead of a response code, you end-up being connected or in early media, OpenSIPS cannot retarget the call in all situations. Thinks work random and fail for unknown reasons due to un-deterministic  behavior of the GSM operators involved.

Adrian

On Oct 9, 2012, at 2:40 PM, Schneur Rosenberg wrote:

If you disable voicemail on the mobile phone through the carrier then you should get a busy signal from the carrier, if you also disable call waiting then you should also get busy a busy signal from the carrier, its not really required if you don't mind being disturbed by the beep , this might not always be a solution because you loose voicemail and call waiting on your phone.

Another solution might be to send the call through a Asterisk server and use the amd (answering machine detection) function.

On Oct 8, 2012 11:17 PM, "Adrian Georgescu" <[hidden email]> wrote:
There is no standard for communicating signaling information from a non-IP network like GSM to a SIP based network. What you try to achieve is close to impossible unless you own both networks and are able to set up some proprietary signaling mechanism between them.

Adrian
 
On Oct 8, 2012, at 10:56 PM, Engineer voip wrote:

Hi,
I want to associate a mobile phone number to each desktop phone and want to ringing at the same time the desktop phone and mobile phone:
** if the mobile phone is off service or already in communication (call falls on the responder) the opensips ignore this mobile and keep ringing the desktop phone.

i hope this is clear

2012/10/8 Duane Larson <[hidden email]>
Can you explain in more detail what you are trying to do?  


On Mon, Oct 8, 2012 at 8:32 AM, Engineer voip <[hidden email]> wrote:
Hello,
I do that and its good but
if user A hangs up the call, the user B is hanging too.
I want when user A hangs up or responderthe user B can
take the call!
have you an idea to resolve that?

2012/10/8 Vlad Paiu <[hidden email]>
Hello,

This is the usual SIP parallel forking, so yes this can be done with OpenSIPS 1.8. See the append_branch() function at [1] .

[1] http://www.opensips.org/Resources/DocsCoreFcn18#toc106

Regards,
Vlad Paiu
OpenSIPS Developer
http://www.opensips-solutions.com 

On 10/08/2012 12:00 AM, Engineer voip wrote:
Hi All,
It is possible to call a standard (fix) phone and mobile phone at the same time with OpenSIPS 1.8 ??

--

Best Regards.


_______________________________________________ Users mailing list [hidden email] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--

Best Regards.



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: [hidden email]
Email: [hidden email]

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users