howto get NAPTR lookup

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

howto get NAPTR lookup

dilip-4
Hello,

I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
When I m firing the call, I m getting the following error on openser ::

---------------------------------------------------------------------------------------------
  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
  2(31823) enum_query(): No NAPTR record found for  
0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
  2(31823) enum_query(): No NAPTR record found for  
0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
  2(31823) DISPATCHER:ds_select_dst: set index [1->0]
  2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
  2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
  2(31823) DEBUG: mk_proxy: doing DNS lookup...
  2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!
  2(31823) get_record: lookup(xyz.com, 35) failed
  2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found for  
xyz.com, trying direct SRV lookup...
  2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
  2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for  
_sip._udp.xyz.com, trying A record lookup...
  2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
---------------------------------------------------------------------------------------------

  openser.cfg file :::

loadmodule "enum.so"

modparam("enum", "domain_suffix", "e164.arpa.")         #urmi

modparam("acc", "radius_extra", "
                                        Called-Station-Id=$tu;
                                        Calling-Station-Id=$fu;
                                        Canonical-URI=$tu;
                                         User-Name=$au;
                                         Sip-User-Realm=$ar;
                                       Source-IP=$si;
                                         Source-Port=$sp;
                                       From-Header=$hdr(from);
                                         User-Agent=$hdr(user-agent);
                                         Contact=$hdr(contact);
                                         ENUM-TLD=$avp(s:enum_tld);
                                         Event=$hdr(event)")


route
{

         if (uri=~"^sip:1[1-9][0-9]*"){
         #       strip(2);
                 prefix("+");
         };

         if (uri=~"sip:\+[0-9]+")
         {
                 xdbg("\n\n---- urmi second if ENUM uri----\n\n");

                 if ( !enum_query("e164.arpa.") )
                 {
#                enum_query("nrenum.net.");
                  enum_query("e164.arpa.");
                 };
         };

}
-----------------------------------------------------------------------------------------------------------------
Can you please hepl me out in this.


Thanks in advance.
Urmi





_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: howto get NAPTR lookup

Bogdan-Andrei Iancu
Hi Urmi,

I see here 2 queries:

1) an enum one - and the number you are looking has no enum record

2) a DNS lookup (NAPTR, SRV, A) for xyz.com domain - and it looks there
are no entries in DNS for it.

Regards,
Bogdan

[hidden email] wrote:

> Hello,
>
> I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
> When I m firing the call, I m getting the following error on openser ::
>
> ---------------------------------------------------------------------------------------------
>   2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>   2(31823) enum_query(): No NAPTR record found for  
> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>   2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>   2(31823) enum_query(): No NAPTR record found for  
> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>   2(31823) DISPATCHER:ds_select_dst: set index [1->0]
>   2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
>   2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>   2(31823) DEBUG: mk_proxy: doing DNS lookup...
>   2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!
>   2(31823) get_record: lookup(xyz.com, 35) failed
>   2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found for  
> xyz.com, trying direct SRV lookup...
>   2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
>   2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for  
> _sip._udp.xyz.com, trying A record lookup...
>   2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
> ---------------------------------------------------------------------------------------------
>
>   openser.cfg file :::
>
> loadmodule "enum.so"
>
> modparam("enum", "domain_suffix", "e164.arpa.")         #urmi
>
> modparam("acc", "radius_extra", "
>                                         Called-Station-Id=$tu;
>                                         Calling-Station-Id=$fu;
>                                         Canonical-URI=$tu;
>                                          User-Name=$au;
>                                          Sip-User-Realm=$ar;
>                                        Source-IP=$si;
>                                          Source-Port=$sp;
>                                        From-Header=$hdr(from);
>                                          User-Agent=$hdr(user-agent);
>                                          Contact=$hdr(contact);
>                                          ENUM-TLD=$avp(s:enum_tld);
>                                          Event=$hdr(event)")
>
>
> route
> {
>
>          if (uri=~"^sip:1[1-9][0-9]*"){
>          #       strip(2);
>                  prefix("+");
>          };
>
>          if (uri=~"sip:\+[0-9]+")
>          {
>                  xdbg("\n\n---- urmi second if ENUM uri----\n\n");
>
>                  if ( !enum_query("e164.arpa.") )
>                  {
> #                enum_query("nrenum.net.");
>                   enum_query("e164.arpa.");
>                  };
>          };
>
> }
> -----------------------------------------------------------------------------------------------------------------
> Can you please hepl me out in this.
>
>
> Thanks in advance.
> Urmi
>
>
>
>
>
> _______________________________________________
> Users mailing list
> [hidden email]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: howto get NAPTR lookup

dilip-4
Hello Bogdan,

Thanks 4 ur quick reply.

Many of our calls are done through this ENUM url (i.exyz.com). That  
means, if its not hv DNS entries, than how its possible.

Any thing left in our openser.cfg file. Can u please tell me, the  
solution of this ??

Thanks & Regards,
Urmi



Quoting Bogdan-Andrei Iancu <[hidden email]>:

> Hi Urmi,
>
> I see here 2 queries:
>
> 1) an enum one - and the number you are looking has no enum record
>
> 2) a DNS lookup (NAPTR, SRV, A) for xyz.com domain - and it looks there
> are no entries in DNS for it.
>
> Regards,
> Bogdan
>
> [hidden email] wrote:
>> Hello,
>>
>> I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
>> When I m firing the call, I m getting the following error on openser ::
>>
>> ---------------------------------------------------------------------------------------------
>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>>  2(31823) enum_query(): No NAPTR record found for    
>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>>  2(31823) enum_query(): No NAPTR record found for    
>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>  2(31823) DISPATCHER:ds_select_dst: set index [1->0]
>>  2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
>>  2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>>  2(31823) DEBUG: mk_proxy: doing DNS lookup...
>>  2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!
>>  2(31823) get_record: lookup(xyz.com, 35) failed
>>  2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found for    
>> xyz.com, trying direct SRV lookup...
>>  2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
>>  2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for    
>> _sip._udp.xyz.com, trying A record lookup...
>>  2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
>> ---------------------------------------------------------------------------------------------
>>
>>  openser.cfg file :::
>>
>> loadmodule "enum.so"
>>
>> modparam("enum", "domain_suffix", "e164.arpa.")         #urmi
>>
>> modparam("acc", "radius_extra", "
>>                                        Called-Station-Id=$tu;
>>                                        Calling-Station-Id=$fu;
>>                                        Canonical-URI=$tu;
>>                                         User-Name=$au;
>>                                         Sip-User-Realm=$ar;
>>                                       Source-IP=$si;
>>                                         Source-Port=$sp;
>>                                       From-Header=$hdr(from);
>>                                         User-Agent=$hdr(user-agent);
>>                                         Contact=$hdr(contact);
>>                                         ENUM-TLD=$avp(s:enum_tld);
>>                                         Event=$hdr(event)")
>>
>>
>> route
>> {
>>
>>         if (uri=~"^sip:1[1-9][0-9]*"){
>>         #       strip(2);
>>                 prefix("+");
>>         };
>>
>>         if (uri=~"sip:\+[0-9]+")
>>         {
>>                 xdbg("\n\n---- urmi second if ENUM uri----\n\n");
>>
>>                 if ( !enum_query("e164.arpa.") )
>>                 {
>> #                enum_query("nrenum.net.");
>>                  enum_query("e164.arpa.");
>>                 };
>>         };
>>
>> }
>> -----------------------------------------------------------------------------------------------------------------
>> Can you please hepl me out in this.
>>
>>
>> Thanks in advance.
>> Urmi
>>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: howto get NAPTR lookup

Bogdan-Andrei Iancu
Hi Urmi,

looking at the logs you sent, there is first an ENUM lookup (which has
nothing to do with the xyz.com domain) and then a forward (via
dispatcher) to the xyz.com domain.

I'm not sure I understand your question here.....

Regards,
Bogdan

[hidden email] wrote:

> Hello Bogdan,
>
> Thanks 4 ur quick reply.
>
> Many of our calls are done through this ENUM url (i.exyz.com). That  
> means, if its not hv DNS entries, than how its possible.
>
> Any thing left in our openser.cfg file. Can u please tell me, the  
> solution of this ??
>
> Thanks & Regards,
> Urmi
>
>
>
> Quoting Bogdan-Andrei Iancu <[hidden email]>:
>
>  
>> Hi Urmi,
>>
>> I see here 2 queries:
>>
>> 1) an enum one - and the number you are looking has no enum record
>>
>> 2) a DNS lookup (NAPTR, SRV, A) for xyz.com domain - and it looks there
>> are no entries in DNS for it.
>>
>> Regards,
>> Bogdan
>>
>> [hidden email] wrote:
>>    
>>> Hello,
>>>
>>> I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
>>> When I m firing the call, I m getting the following error on openser ::
>>>
>>> ---------------------------------------------------------------------------------------------
>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>>>  2(31823) enum_query(): No NAPTR record found for    
>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35) failed
>>>  2(31823) enum_query(): No NAPTR record found for    
>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>  2(31823) DISPATCHER:ds_select_dst: set index [1->0]
>>>  2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
>>>  2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>>>  2(31823) DEBUG: mk_proxy: doing DNS lookup...
>>>  2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!
>>>  2(31823) get_record: lookup(xyz.com, 35) failed
>>>  2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found for    
>>> xyz.com, trying direct SRV lookup...
>>>  2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
>>>  2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for    
>>> _sip._udp.xyz.com, trying A record lookup...
>>>  2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
>>> ---------------------------------------------------------------------------------------------
>>>
>>>  openser.cfg file :::
>>>
>>> loadmodule "enum.so"
>>>
>>> modparam("enum", "domain_suffix", "e164.arpa.")         #urmi
>>>
>>> modparam("acc", "radius_extra", "
>>>                                        Called-Station-Id=$tu;
>>>                                        Calling-Station-Id=$fu;
>>>                                        Canonical-URI=$tu;
>>>                                         User-Name=$au;
>>>                                         Sip-User-Realm=$ar;
>>>                                       Source-IP=$si;
>>>                                         Source-Port=$sp;
>>>                                       From-Header=$hdr(from);
>>>                                         User-Agent=$hdr(user-agent);
>>>                                         Contact=$hdr(contact);
>>>                                         ENUM-TLD=$avp(s:enum_tld);
>>>                                         Event=$hdr(event)")
>>>
>>>
>>> route
>>> {
>>>
>>>         if (uri=~"^sip:1[1-9][0-9]*"){
>>>         #       strip(2);
>>>                 prefix("+");
>>>         };
>>>
>>>         if (uri=~"sip:\+[0-9]+")
>>>         {
>>>                 xdbg("\n\n---- urmi second if ENUM uri----\n\n");
>>>
>>>                 if ( !enum_query("e164.arpa.") )
>>>                 {
>>> #                enum_query("nrenum.net.");
>>>                  enum_query("e164.arpa.");
>>>                 };
>>>         };
>>>
>>> }
>>> -----------------------------------------------------------------------------------------------------------------
>>> Can you please hepl me out in this.
>>>
>>>
>>> Thanks in advance.
>>> Urmi
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> [hidden email]
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>      
>
>
>
> _______________________________________________
> Users mailing list
> [hidden email]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>  


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: howto get NAPTR lookup

dilip-4
Hello,

I want to use ENUM with openser. My ENUM url is _xyz.com_
I m forwarding the call on enum url (i.e xyz.com) but, I m getting prob
in that.
Here, I have attached my openser.cfg file and dispatcher.list file.

Whats wrong with it ?? please guide me for that.


Thanks & Regards,

Urmi


************************************************************************

*Openser.cfg file ::*

************************************************************************

#openser version 1.1
# ----------- global configuration parameters ------------------------

debug=9          # debug level (cmd line: -dddddddddd
fork=yes
log_stderror=yes  # (cmd line: -E)
#log_facility=LOG_LOCAL5
check_via=no    # (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)


listen=udp:x.x.x.x
port=3030
children=8
#fifo="/tmp/openser_fifo"

#unix_sock_children=2

# ------------------ module loading ----------------------------------
mpath="/usr/local/lib/openser/modules"

loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "xlog.so"
loadmodule "uri.so"
loadmodule "acc.so"
loadmodule "auth.so"
loadmodule "auth_radius.so"
loadmodule "dispatcher.so"
loadmodule "nathelper.so"
loadmodule "enum.so"
# ----------------- setting module-specific parameters ---------------
#------------------ registrar testing---------------------------------
modparam("registrar", "default_expires", 2250000)

#------------------Dialog Module--------------------------------------

# -- usrloc params --
modparam("dispatcher", "list_file", "/usr/local/etc/openser/dispatcher.list")
modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser")
modparam("usrloc","db_mode", 3)
modparam("usrloc", "timer_interval", 30)
#modparam("usrloc", "expires_column", "225000")
#modparam("usrloc", "cseq_delay", 60)
#modparam("usrloc", "timer_interval", 30)
#modparam("usrloc","desc_time_order", 1)
#modparam("usrloc", "matching_mode", 1)
#modparam("registrar", "desc_time_order", 1)
modparam("usrloc", "desc_time_order", 0)     # urmi :: for q-value change
#modparam("registrar", "max_contacts", 1)

################################## ENUM ######################
modparam("enum", "domain_suffix", "e164.arpa.") #urmi

# -- acc params --

#################################################################################

modparam("acc", "log_flag",           1)
modparam("acc", "log_missed_flag",    2)

modparam("acc", "service_type", 15)
modparam("acc|auth_radius", "radius_config","/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "radius_flag",        1)
modparam("acc", "radius_missed_flag", 1)

modparam("acc", "radius_extra", "
                                       Called-Station-Id=$tu;
                                       Calling-Station-Id=$fu;
                                       Canonical-URI=$tu;
                                                User-Name=$au;
                                        Sip-User-Realm=$ar;
                                      Source-IP=$si;
                                        Source-Port=$sp;
                                      From-Header=$hdr(from);
                                        User-Agent=$hdr(user-agent);
                                        Contact=$hdr(contact);
                                        ENUM-TLD=$avp(s:enum_tld);
                                                Event=$hdr(event)")
       


# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{
        xdbg("\n\n---- Start -----\n\n");
        if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
        };

        if (msg:len >=  2048 ) {
                sl_send_reply("513", "Message too big");
                exit;
        };
   
        if (!method=="REGISTER"){
                record_route();
        };

        if (loose_route()){
            xdbg("\n\n---- Loose route  ----\n\n");
        xdbg("\n\n-------- Stop Accounting   --------\n\n");
            setflag(1); #Stop accounting
            route(1);
            exit;
        };

        if ((src_ip=="xyz.com") ) {
  xdbg("\n\n---- From sip proxy server -----\n\n");
                route(2);
                exit;
  };


        if (method=="REGISTER"){
                xdbg("\n\n---- Register  ----\n\n");
                route(3);
                exit;
        };
        if (method=="INVITE")
        {
          xdbg("\n\n-------- Start Accounting   --------\n\n");

        if (nat_uac_test("19"))
        {
               xdbg("\n\n-------- Nated  --------\n\n");
                fix_nated_contact();
                force_rport();
        };

                xdbg("\n\n---- Invite  INSIDE.............----\n\n");

                if (!radius_www_authorize(""))
                {
                        www_challenge("", "0");
                        exit;
                };

                acc_rad_request("Start");
               
                xdbg("\n\n---- AFTER RADIUS  ----\n\n");
  };


        if (uri=~"^sip:[1-9][0-9]*") { # temp  for austrlia
# strip(1);
                xdbg("\n\n---- urmi----\n\n");
                xdbg("\n\n---- urmi----\n\n");
                xdbg("\n\n---- urmi----\n\n");
                prefix("+");
        };

        if (uri=~"sip:\+[0-9]+")
        {
                if ( !enum_query("e164.arpa.") )
                {
#         enum_query("e164.arpa.");
                 enum_query("nrenum.net.");
#         enum_query("xyz.com");   #running
                };
        };



  ds_select_dst("1", "0");
        forward();
        exit;
}

# generic forward
route[1]
{
        if (!t_relay()) {
            sl_reply_error();
        };
}

route[2]
{
        if (lookup("location"))
        {
                route(1);
        }else{
                sl_send_reply("404", "Not Found");
                xdbg("\n\n-------- To sip proxy ---urmi  --------\n\n");
          ds_select_dst("3", "0");
          forward();

        };
}

#Register
route[3]
{
        if (nat_uac_test("18"))
        {
                xdbg("\n\n-------- Nated  --------\n\n");
                fix_nated_register();
                force_rport();
        };

        if (!radius_www_authorize(""))
        {
        xdbg("\n\n--- Inside Route 3  ----\n\n");
                www_challenge("", "0");
                exit;
        };

        save("location");
}


************************************************************************

*dispatcher.list file ::*

************************************************************************

1 sip:xyz.com


************************************************************************

*Problem on OpenSER ::*

************************************************************************

2(31443) enum_query(): order 1, pref 10, flen 1, flags 'u', slen 7,
services 'E2U+sip', rlen 36, regexp '!^.*$!sip:[hidden email]!'

2(31443) reg_replace(): pattern: '^.*$', replacement:
'sip:[hidden email]', string: '+61590077777'

2(31443) enum_query(): resulted in replacement:
'sip:[hidden email]'

2(31443) rewrite_uri: Rewriting Request-URI with
'sip:[hidden email]'

2(31443) DISPATCHER:ds_select_dst: set index [1->0]

2(31443) DISPATCHER:ds_select_dst: alg hash [2930033304]

2(31443) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>

2(31443) DEBUG: mk_proxy: doing DNS lookup...

2(31443) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!

2(31443) get_record: lookup(xyz.com, 35) failed

2(31443) DEBUG:sip_resolvehost2: no valid NAPTR record found for
xyz.com, trying direct SRV lookup...

2(31443) get_record: lookup(_sip._udp.xyz.com, 33) failed

2(31443) DEBUG:sip_resolvehost2: no valid SRV record found for
_sip._udp.xyz.com, trying A record lookup...

2(31443) ERROR: mk_proxy: could not resolve hostname: "xyz.com"

*************************************************************


Bogdan-Andrei Iancu wrote:

> Hi Urmi,
>
> looking at the logs you sent, there is first an ENUM lookup (which has
> nothing to do with the xyz.com domain) and then a forward (via
> dispatcher) to the xyz.com domain.
>
> I'm not sure I understand your question here.....
>
> Regards,
> Bogdan
>
> [hidden email] wrote:
>> Hello Bogdan,
>>
>> Thanks 4 ur quick reply.
>>
>> Many of our calls are done through this ENUM url (i.exyz.com). That  
>> means, if its not hv DNS entries, than how its possible.
>>
>> Any thing left in our openser.cfg file. Can u please tell me, the  
>> solution of this ??
>>
>> Thanks & Regards,
>> Urmi
>>
>>
>>
>> Quoting Bogdan-Andrei Iancu <[hidden email]>:
>>
>>  
>>> Hi Urmi,
>>>
>>> I see here 2 queries:
>>>
>>> 1) an enum one - and the number you are looking has no enum record
>>>
>>> 2) a DNS lookup (NAPTR, SRV, A) for xyz.com domain - and it looks there
>>> are no entries in DNS for it.
>>>
>>> Regards,
>>> Bogdan
>>>
>>> [hidden email] wrote:
>>>    
>>>> Hello,
>>>>
>>>> I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
>>>> When I m firing the call, I m getting the following error on
>>>> openser ::
>>>>
>>>> ---------------------------------------------------------------------------------------------
>>>>
>>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35)
>>>> failed
>>>>  2(31823) enum_query(): No NAPTR record found for    
>>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35)
>>>> failed
>>>>  2(31823) enum_query(): No NAPTR record found for    
>>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>>  2(31823) DISPATCHER:ds_select_dst: set index [1->0]
>>>>  2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
>>>>  2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>>>>  2(31823) DEBUG: mk_proxy: doing DNS lookup...
>>>>  2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR
>>>> lookup!
>>>>  2(31823) get_record: lookup(xyz.com, 35) failed
>>>>  2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found
>>>> for    xyz.com, trying direct SRV lookup...
>>>>  2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
>>>>  2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for    
>>>> _sip._udp.xyz.com, trying A record lookup...
>>>>  2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
>>>> ---------------------------------------------------------------------------------------------
>>>>
>>>>
>>>>  openser.cfg file :::
>>>>
>>>> loadmodule "enum.so"
>>>>
>>>> modparam("enum", "domain_suffix", "e164.arpa.")         #urmi
>>>>
>>>> modparam("acc", "radius_extra", "
>>>>                                        Called-Station-Id=$tu;
>>>>                                        Calling-Station-Id=$fu;
>>>>                                        Canonical-URI=$tu;
>>>>                                         User-Name=$au;
>>>>                                         Sip-User-Realm=$ar;
>>>>                                       Source-IP=$si;
>>>>                                         Source-Port=$sp;
>>>>                                       From-Header=$hdr(from);
>>>>                                         User-Agent=$hdr(user-agent);
>>>>                                         Contact=$hdr(contact);
>>>>                                         ENUM-TLD=$avp(s:enum_tld);
>>>>                                         Event=$hdr(event)")
>>>>
>>>>
>>>> route
>>>> {
>>>>
>>>>         if (uri=~"^sip:1[1-9][0-9]*"){
>>>>         #       strip(2);
>>>>                 prefix("+");
>>>>         };
>>>>
>>>>         if (uri=~"sip:\+[0-9]+")
>>>>         {
>>>>                 xdbg("\n\n---- urmi second if ENUM uri----\n\n");
>>>>
>>>>                 if ( !enum_query("e164.arpa.") )
>>>>                 {
>>>> #                enum_query("nrenum.net.");
>>>>                  enum_query("e164.arpa.");
>>>>                 };
>>>>         };
>>>>
>>>> }
>>>> -----------------------------------------------------------------------------------------------------------------
>>>>
>>>> Can you please hepl me out in this.
>>>>
>>>>
>>>> Thanks in advance.
>>>> Urmi
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> [hidden email]
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>      
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>  
>
>


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: howto get NAPTR lookup

Bogdan-Andrei Iancu
Dilip,

The error does not come from the ENUM lookup, but from using "xyz.com"
as destination in dispatcher.

Regards,
Bogdan

Dilip wrote:

> Hello,
>
> I want to use ENUM with openser. My ENUM url is _xyz.com_
> I m forwarding the call on enum url (i.e xyz.com) but, I m getting
> prob in that.
> Here, I have attached my openser.cfg file and dispatcher.list file.
>
> Whats wrong with it ?? please guide me for that.
>
>
> Thanks & Regards,
>
> Urmi
>
>
> ************************************************************************
>
> *Openser.cfg file ::*
>
> ************************************************************************
>
> #openser version 1.1
> # ----------- global configuration parameters ------------------------
>
> debug=9          # debug level (cmd line: -dddddddddd
> fork=yes
> log_stderror=yes  # (cmd line: -E)
> #log_facility=LOG_LOCAL5
> check_via=no    # (cmd. line: -v)
> dns=no          # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
>
>
> listen=udp:x.x.x.x
> port=3030
> children=8
> #fifo="/tmp/openser_fifo"
>
> #unix_sock_children=2
>
> # ------------------ module loading ----------------------------------
> mpath="/usr/local/lib/openser/modules"
>
> loadmodule "mysql.so"
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "xlog.so"
> loadmodule "uri.so"
> loadmodule "acc.so"
> loadmodule "auth.so"
> loadmodule "auth_radius.so"
> loadmodule "dispatcher.so"
> loadmodule "nathelper.so"
> loadmodule "enum.so"
> # ----------------- setting module-specific parameters ---------------
> #------------------ registrar testing---------------------------------
> modparam("registrar", "default_expires", 2250000)
>
> #------------------Dialog Module--------------------------------------
>
> # -- usrloc params --
> modparam("dispatcher", "list_file",
> "/usr/local/etc/openser/dispatcher.list")
> modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser")
> modparam("usrloc","db_mode", 3)
> modparam("usrloc", "timer_interval", 30)
> #modparam("usrloc", "expires_column", "225000")
> #modparam("usrloc", "cseq_delay", 60)
> #modparam("usrloc", "timer_interval", 30)
> #modparam("usrloc","desc_time_order", 1)
> #modparam("usrloc", "matching_mode", 1)
> #modparam("registrar", "desc_time_order", 1)
> modparam("usrloc", "desc_time_order", 0)     # urmi :: for q-value change
> #modparam("registrar", "max_contacts", 1)
>
> ################################## ENUM ######################
> modparam("enum", "domain_suffix", "e164.arpa.")        #urmi
>
> # -- acc params --
>
> #################################################################################
>
>
> modparam("acc", "log_flag",           1)
> modparam("acc", "log_missed_flag",    2)
>
> modparam("acc", "service_type", 15)
> modparam("acc|auth_radius",
> "radius_config","/etc/radiusclient-ng/radiusclient.conf")
> modparam("acc", "radius_flag",        1)
> modparam("acc", "radius_missed_flag", 1)
>
> modparam("acc", "radius_extra", "
>                                       Called-Station-Id=$tu;
>                                       Calling-Station-Id=$fu;
>                                       Canonical-URI=$tu;
>                         User-Name=$au;
>                                        Sip-User-Realm=$ar;
>                                      Source-IP=$si;
>                                        Source-Port=$sp;
>                                      From-Header=$hdr(from);
>                                        User-Agent=$hdr(user-agent);
>                                        Contact=$hdr(contact);
>                                        ENUM-TLD=$avp(s:enum_tld);
>                         Event=$hdr(event)")
>    
>
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # -------------------------  request routing logic -------------------
>
> # main routing logic
>
> route{
>     xdbg("\n\n---- Start -----\n\n");
>     if (!mf_process_maxfwd_header("10")) {
>            sl_send_reply("483","Too Many Hops");
>            exit;
>     };
>
>     if (msg:len >=  2048 ) {
>         sl_send_reply("513", "Message too big");
>         exit;
>     };
>        if (!method=="REGISTER"){
>         record_route();
>     };
>
>        if (loose_route()){
>            xdbg("\n\n---- Loose route  ----\n\n");
>            xdbg("\n\n-------- Stop Accounting   --------\n\n");
>               setflag(1);    #Stop accounting
>            route(1);
>            exit;
>        };
>
>     if ((src_ip=="xyz.com") ) {    
>         xdbg("\n\n---- From sip proxy server -----\n\n");
>         route(2);
>         exit;
>     };
>
>
>     if (method=="REGISTER"){
>         xdbg("\n\n---- Register  ----\n\n");
>         route(3);
>         exit;
>     };
>     if (method=="INVITE")
>     {
>             xdbg("\n\n-------- Start Accounting   --------\n\n");
>
>            if (nat_uac_test("19"))
>            {
>                    xdbg("\n\n-------- Nated  --------\n\n");
>                    fix_nated_contact();
>                    force_rport();
>            };
>
>         xdbg("\n\n---- Invite  INSIDE.............----\n\n");
>
>         if (!radius_www_authorize(""))         {
>             www_challenge("", "0");
>             exit;
>         };
>
>         acc_rad_request("Start");  
>        
>         xdbg("\n\n---- AFTER RADIUS  ----\n\n");
>     };
>
>
>     if (uri=~"^sip:[1-9][0-9]*") { # temp  for austrlia
> #        strip(1);
>         xdbg("\n\n---- urmi----\n\n");
>         xdbg("\n\n---- urmi----\n\n");
>         xdbg("\n\n---- urmi----\n\n");
>         prefix("+");
>     };
>     if (uri=~"sip:\+[0-9]+")
>     {
>         if ( !enum_query("e164.arpa.") )
>         {
> #             enum_query("e164.arpa.");
>              enum_query("nrenum.net.");
> #             enum_query("xyz.com");   #running
>         };
>     };
>
>
>
>      ds_select_dst("1", "0");
>     forward();
>     exit;
> }
>
> # generic forward
> route[1] {
>     if (!t_relay()) {
>         sl_reply_error();
>     };
> }
>
> route[2]
> {
>     if (lookup("location"))
>     {
>         route(1);
>     }else{
>         sl_send_reply("404", "Not Found");
>         xdbg("\n\n-------- To sip proxy ---urmi  --------\n\n");
>          ds_select_dst("3", "0");
>          forward();
>
>     };
> }
>
> #Register
> route[3]
> {
>     if (nat_uac_test("18"))
>     {
>             xdbg("\n\n-------- Nated  --------\n\n");
>         fix_nated_register();
>         force_rport();  
>     };
>
>     if (!radius_www_authorize(""))
>     {
>     xdbg("\n\n--- Inside Route 3  ----\n\n");
>         www_challenge("", "0");
>         exit;
>     };
>
>     save("location");
> }
>
>
> ************************************************************************
>
> *dispatcher.list file ::*
>
> ************************************************************************
>
> 1 sip:xyz.com
>
>
> ************************************************************************
>
> *Problem on OpenSER ::*
>
> ************************************************************************
>
> 2(31443) enum_query(): order 1, pref 10, flen 1, flags 'u', slen 7,
> services 'E2U+sip', rlen 36, regexp
> '!^.*$!sip:[hidden email]!'
>
> 2(31443) reg_replace(): pattern: '^.*$', replacement:
> 'sip:[hidden email]', string: '+61590077777'
>
> 2(31443) enum_query(): resulted in replacement:
> 'sip:[hidden email]'
>
> 2(31443) rewrite_uri: Rewriting Request-URI with
> 'sip:[hidden email]'
>
> 2(31443) DISPATCHER:ds_select_dst: set index [1->0]
>
> 2(31443) DISPATCHER:ds_select_dst: alg hash [2930033304]
>
> 2(31443) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>
> 2(31443) DEBUG: mk_proxy: doing DNS lookup...
>
> 2(31443) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR lookup!
>
> 2(31443) get_record: lookup(xyz.com, 35) failed
>
> 2(31443) DEBUG:sip_resolvehost2: no valid NAPTR record found for
> xyz.com, trying direct SRV lookup...
>
> 2(31443) get_record: lookup(_sip._udp.xyz.com, 33) failed
>
> 2(31443) DEBUG:sip_resolvehost2: no valid SRV record found for
> _sip._udp.xyz.com, trying A record lookup...
>
> 2(31443) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
>
> *************************************************************
>
>
> Bogdan-Andrei Iancu wrote:
>> Hi Urmi,
>>
>> looking at the logs you sent, there is first an ENUM lookup (which
>> has nothing to do with the xyz.com domain) and then a forward (via
>> dispatcher) to the xyz.com domain.
>>
>> I'm not sure I understand your question here.....
>>
>> Regards,
>> Bogdan
>>
>> [hidden email] wrote:
>>> Hello Bogdan,
>>>
>>> Thanks 4 ur quick reply.
>>>
>>> Many of our calls are done through this ENUM url (i.exyz.com). That  
>>> means, if its not hv DNS entries, than how its possible.
>>>
>>> Any thing left in our openser.cfg file. Can u please tell me, the  
>>> solution of this ??
>>>
>>> Thanks & Regards,
>>> Urmi
>>>
>>>
>>>
>>> Quoting Bogdan-Andrei Iancu <[hidden email]>:
>>>
>>>  
>>>> Hi Urmi,
>>>>
>>>> I see here 2 queries:
>>>>
>>>> 1) an enum one - and the number you are looking has no enum record
>>>>
>>>> 2) a DNS lookup (NAPTR, SRV, A) for xyz.com domain - and it looks
>>>> there
>>>> are no entries in DNS for it.
>>>>
>>>> Regards,
>>>> Bogdan
>>>>
>>>> [hidden email] wrote:
>>>>  
>>>>> Hello,
>>>>>
>>>>> I want to use ENUM with openser + CDRTool.  xyz is my ENUM url.
>>>>> When I m firing the call, I m getting the following error on
>>>>> openser ::
>>>>>
>>>>> ---------------------------------------------------------------------------------------------
>>>>>
>>>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35)
>>>>> failed
>>>>>  2(31823) enum_query(): No NAPTR record found for    
>>>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>>>  2(31823) get_record: lookup(0.0.5.2.7.3.3.3.0.3.1.e164.arpa., 35)
>>>>> failed
>>>>>  2(31823) enum_query(): No NAPTR record found for    
>>>>> 0.0.5.2.7.3.3.3.0.3.1.e164.arpa..
>>>>>  2(31823) DISPATCHER:ds_select_dst: set index [1->0]
>>>>>  2(31823) DISPATCHER:ds_select_dst: alg hash [450732010]
>>>>>  2(31823) DISPATCHER:ds_select_dst: selected [0-1/0/0] <sip:xyz.com>
>>>>>  2(31823) DEBUG: mk_proxy: doing DNS lookup...
>>>>>  2(31823) DEBUG:sip_resolvehost2: no port, no proto -> do NAPTR
>>>>> lookup!
>>>>>  2(31823) get_record: lookup(xyz.com, 35) failed
>>>>>  2(31823) DEBUG:sip_resolvehost2: no valid NAPTR record found
>>>>> for    xyz.com, trying direct SRV lookup...
>>>>>  2(31823) get_record: lookup(_sip._udp.xyz.com, 33) failed
>>>>>  2(31823) DEBUG:sip_resolvehost2: no valid SRV record found for    
>>>>> _sip._udp.xyz.com, trying A record lookup...
>>>>>  2(31823) ERROR: mk_proxy: could not resolve hostname: "xyz.com"
>>>>> ---------------------------------------------------------------------------------------------
>>>>>
>>>>>
>>>>>  openser.cfg file :::
>>>>>
>>>>> loadmodule "enum.so"
>>>>>
>>>>> modparam("enum", "domain_suffix", "e164.arpa.")         #urmi
>>>>>
>>>>> modparam("acc", "radius_extra", "
>>>>>                                        Called-Station-Id=$tu;
>>>>>                                        Calling-Station-Id=$fu;
>>>>>                                        Canonical-URI=$tu;
>>>>>                                         User-Name=$au;
>>>>>                                         Sip-User-Realm=$ar;
>>>>>                                       Source-IP=$si;
>>>>>                                         Source-Port=$sp;
>>>>>                                       From-Header=$hdr(from);
>>>>>                                         User-Agent=$hdr(user-agent);
>>>>>                                         Contact=$hdr(contact);
>>>>>                                         ENUM-TLD=$avp(s:enum_tld);
>>>>>                                         Event=$hdr(event)")
>>>>>
>>>>>
>>>>> route
>>>>> {
>>>>>
>>>>>         if (uri=~"^sip:1[1-9][0-9]*"){
>>>>>         #       strip(2);
>>>>>                 prefix("+");
>>>>>         };
>>>>>
>>>>>         if (uri=~"sip:\+[0-9]+")
>>>>>         {
>>>>>                 xdbg("\n\n---- urmi second if ENUM uri----\n\n");
>>>>>
>>>>>                 if ( !enum_query("e164.arpa.") )
>>>>>                 {
>>>>> #                enum_query("nrenum.net.");
>>>>>                  enum_query("e164.arpa.");
>>>>>                 };
>>>>>         };
>>>>>
>>>>> }
>>>>> -----------------------------------------------------------------------------------------------------------------
>>>>>
>>>>> Can you please hepl me out in this.
>>>>>
>>>>>
>>>>> Thanks in advance.
>>>>> Urmi
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> [hidden email]
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>>      
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> [hidden email]
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>  
>>
>>
>
>


_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users