mediaproxy and radius integration

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

mediaproxy and radius integration

Авдиенко Михаил

Gabriel Bermudez wrote:

> Hi list,

> Got this issue with mediaproxy. The mediaproxy dispatcher is not able to
> read the radius configuration file

> [Radius]
> config_file = /etc/radiusclient-ng/radiusclient.conf
> additional_dictionary = radius/dictionary.opensips

> The file is there, opensips can read it, but mediaproxy dispatcher
> can't?!.  This log output

> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting MediaProxy
> Dispatcher 2.3.2
> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
> epollreactor
> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: cannot
> read the RADIUS configuration file
> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: failed
> to create MediaProxy Dispatcher: 'localhost'

> Don't know what I'm doing wrong.  Thanks for you advice.

> Regards,

I have this issue too. I discovered that it's related to the 'acctserver'  
option in radiusclient.conf file.
I've played with this option trying to add two acctservers and replacing  
localhost 127.0.0.1 and vice-versa.
Sometimes mediaproxy-dispatcher parses file ok, but do not send any  
accounting, sometimes it tries
to create MediaProxy Dispatcher at one of the addresses specified via  
acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
but sometimes it works as expected. I can not find out logic of this  
errors(

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Gabriel Bermudez
Hi,

I have tried to change from localhost to 127.0.0.1 and to my ip address
and still it doesn't works.
With what version are you working, I'm using version 2.3.2.  I'm also
using Ubuntu server 8.10 and downloaded the deb files for ag-project's
debian repository.
Could any that has installed mediaproxy give us a hand, please?
Thanks for your help.

Regards,



Авдиенко Михаил escribió:

> Gabriel Bermudez wrote:
>
>  
>> Hi list,
>>    
>
>  
>> Got this issue with mediaproxy. The mediaproxy dispatcher is not able to
>> read the radius configuration file
>>    
>
>  
>> [Radius]
>> config_file = /etc/radiusclient-ng/radiusclient.conf
>> additional_dictionary = radius/dictionary.opensips
>>    
>
>  
>> The file is there, opensips can read it, but mediaproxy dispatcher
>> can't?!.  This log output
>>    
>
>  
>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting MediaProxy
>> Dispatcher 2.3.2
>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>> epollreactor
>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: cannot
>> read the RADIUS configuration file
>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: failed
>> to create MediaProxy Dispatcher: 'localhost'
>>    
>
>  
>> Don't know what I'm doing wrong.  Thanks for you advice.
>>    
>
>  
>> Regards,
>>    
>
> I have this issue too. I discovered that it's related to the 'acctserver'  
> option in radiusclient.conf file.
> I've played with this option trying to add two acctservers and replacing  
> localhost 127.0.0.1 and vice-versa.
> Sometimes mediaproxy-dispatcher parses file ok, but do not send any  
> accounting, sometimes it tries
> to create MediaProxy Dispatcher at one of the addresses specified via  
> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
> but sometimes it works as expected. I can not find out logic of this  
> errors(
>
> _______________________________________________
> Users mailing list
> [hidden email]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>  

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Ruud Klaver
Hi,

On 26 Jan 2009, at 17:01, Gabriel Bermudez wrote:

> Hi,
>
> I have tried to change from localhost to 127.0.0.1 and to my ip  
> address
> and still it doesn't works.
> With what version are you working, I'm using version 2.3.2.  I'm also
> using Ubuntu server 8.10 and downloaded the deb files for ag-project's
> debian repository.
> Could any that has installed mediaproxy give us a hand, please?
> Thanks for your help.
>
> Regards,
>
>
>
> Авдиенко Михаил escribió:
>> Gabriel Bermudez wrote:
>>
>>
>>> Hi list,
>>>
>>
>>
>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not  
>>> able to
>>> read the radius configuration file
>>>
>>
>>
>>> [Radius]
>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>> additional_dictionary = radius/dictionary.opensips
>>>
>>
>>
>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>> can't?!.  This log output
>>>
>>
>>
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting  
>>> MediaProxy
>>> Dispatcher 2.3.2
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>>> epollreactor
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:  
>>> cannot
>>> read the RADIUS configuration file
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:  
>>> failed
>>> to create MediaProxy Dispatcher: 'localhost'
>>>
>>
>>
>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>
>>
>>
>>> Regards,
>>>
>>
>> I have this issue too. I discovered that it's related to the  
>> 'acctserver'
>> option in radiusclient.conf file.
>> I've played with this option trying to add two acctservers and  
>> replacing
>> localhost 127.0.0.1 and vice-versa.
>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any
>> accounting, sometimes it tries
>> to create MediaProxy Dispatcher at one of the addresses specified via
>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>> but sometimes it works as expected. I can not find out logic of this
>> errors(


I agree that's not a very helpful error, it should report more. Could  
you change the following to make it give a full traceback:
in mediaproxy/interfaces/accounting/radius.py on line 94, replace  
"raise RuntimeError(str(e))" with just "raise". It won't be very  
descriptive, but at least you can give me the full traceback and I can  
analyze what went wrong.

Ruud Klaver
AG Projects
_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Gabriel Bermudez
Hi Ruud,

I downloaded the source files using

apt-get source mediaproxy-common mediaproxy-dispatcher mediaproxy-relay
mediaproxy-web-sessions

then, made the change you asked for and issued the "debuild" command.
After sucessfully installed all the mediaproxy-* packages with "dpkg -i
mediaproxy-*"; this is what comes out on syslog:

Jan 26 13:05:36 ripley media-dispatcher[12041]: [-] Log opened.
Jan 26 13:05:36 ripley media-dispatcher[12041]: [-] Starting MediaProxy
Dispatcher 2.3.2
Jan 26 13:05:36 ripley media-dispatcher[12041]: [-] Twisted is using
epollreactor
Jan 26 13:05:36 ripley media-dispatcher[12041]: [-] fatal error: failed
to create MediaProxy Dispatcher: missing or unreadable file:
tls/dispatcher.crt

Yes, I don't have a /etc/mediaproxy/dispatcher.crt file, but I don't
know if this error has something to do with the parsing of the
radiusclient-ng.conf file we where talking about or if the repackaging
of the deb files did the trick.
Thanks for your help and advice.

PS: It would be nice to have a guide on how to configure mediaproxy on a
wiki; specially an explanation on the SSL/TLS.

Ruud Klaver escribió:

> Hi,
>
> On 26 Jan 2009, at 17:01, Gabriel Bermudez wrote:
>
>> Hi,
>>
>> I have tried to change from localhost to 127.0.0.1 and to my ip address
>> and still it doesn't works.
>> With what version are you working, I'm using version 2.3.2.  I'm also
>> using Ubuntu server 8.10 and downloaded the deb files for ag-project's
>> debian repository.
>> Could any that has installed mediaproxy give us a hand, please?
>> Thanks for your help.
>>
>> Regards,
>>
>>
>>
>> Авдиенко Михаил escribió:
>>> Gabriel Bermudez wrote:
>>>
>>>
>>>> Hi list,
>>>>
>>>
>>>
>>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not
>>>> able to
>>>> read the radius configuration file
>>>>
>>>
>>>
>>>> [Radius]
>>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>>> additional_dictionary = radius/dictionary.opensips
>>>>
>>>
>>>
>>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>>> can't?!.  This log output
>>>>
>>>
>>>
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting MediaProxy
>>>> Dispatcher 2.3.2
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>>>> epollreactor
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: cannot
>>>> read the RADIUS configuration file
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: failed
>>>> to create MediaProxy Dispatcher: 'localhost'
>>>>
>>>
>>>
>>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>>
>>>
>>>
>>>> Regards,
>>>>
>>>
>>> I have this issue too. I discovered that it's related to the
>>> 'acctserver'
>>> option in radiusclient.conf file.
>>> I've played with this option trying to add two acctservers and
>>> replacing
>>> localhost 127.0.0.1 and vice-versa.
>>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any
>>> accounting, sometimes it tries
>>> to create MediaProxy Dispatcher at one of the addresses specified via
>>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>>> but sometimes it works as expected. I can not find out logic of this
>>> errors(
>
>
> I agree that's not a very helpful error, it should report more. Could
> you change the following to make it give a full traceback:
> in mediaproxy/interfaces/accounting/radius.py on line 94, replace
> "raise RuntimeError(str(e))" with just "raise". It won't be very
> descriptive, but at least you can give me the full traceback and I can
> analyze what went wrong.
>
> Ruud Klaver
> AG Projects

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Gabriel Bermudez
In reply to this post by Ruud Klaver
Hi Ruud,

Ruud Klaver escribió:

> Hi,
>
> On 26 Jan 2009, at 17:01, Gabriel Bermudez wrote:
>
>> Hi,
>>
>> I have tried to change from localhost to 127.0.0.1 and to my ip address
>> and still it doesn't works.
>> With what version are you working, I'm using version 2.3.2.  I'm also
>> using Ubuntu server 8.10 and downloaded the deb files for ag-project's
>> debian repository.
>> Could any that has installed mediaproxy give us a hand, please?
>> Thanks for your help.
>>
>> Regards,
>>
>>
>>
>> Авдиенко Михаил escribió:
>>> Gabriel Bermudez wrote:
>>>
>>>
>>>> Hi list,
>>>>
>>>
>>>
>>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not
>>>> able to
>>>> read the radius configuration file
>>>>
>>>
>>>
>>>> [Radius]
>>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>>> additional_dictionary = radius/dictionary.opensips
>>>>
>>>
>>>
>>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>>> can't?!.  This log output
>>>>
>>>
>>>
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting MediaProxy
>>>> Dispatcher 2.3.2
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>>>> epollreactor
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: cannot
>>>> read the RADIUS configuration file
>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: failed
>>>> to create MediaProxy Dispatcher: 'localhost'
>>>>
>>>
>>>
>>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>>
>>>
>>>
>>>> Regards,
>>>>
>>>
>>> I have this issue too. I discovered that it's related to the
>>> 'acctserver'
>>> option in radiusclient.conf file.
>>> I've played with this option trying to add two acctservers and
>>> replacing
>>> localhost 127.0.0.1 and vice-versa.
>>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any
>>> accounting, sometimes it tries
>>> to create MediaProxy Dispatcher at one of the addresses specified via
>>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>>> but sometimes it works as expected. I can not find out logic of this
>>> errors(
>
>
> I agree that's not a very helpful error, it should report more. Could
> you change the following to make it give a full traceback:
> in mediaproxy/interfaces/accounting/radius.py on line 94, replace
> "raise RuntimeError(str(e))" with just "raise". It won't be very
> descriptive, but at least you can give me the full traceback and I can
> analyze what went wrong.
>
> Ruud Klaver
> AG Projects

Here is the stacktrace you asked for:

Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Log opened.
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Starting MediaProxy
Dispatcher 2.3.2
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Twisted is using
epollreactor
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error: cannot
read the RADIUS configuration file
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error: failed
to create MediaProxy Dispatcher: 'localhost'
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Traceback (most
recent call last):
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]     --- <exception
caught here> ---
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
"/usr/bin/media-dispatcher", line 52, in <module>
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]         dispatcher =
Dispatcher()
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
"/var/lib/python-support/python2.5/mediaproxy/dispatcher.py", line 481,
in __init__
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]        
self.accounting = [__import__("mediaproxy.interfaces.accounting.%s" %
mod.lower(), globals(), locals(), [""]).Accounting() for mod in
set(Config.accounting)]
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
"/var/lib/python-support/python2.5/mediaproxy/interfaces/accounting/radius.py",
line 53, in __init__
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]         self.radius
= RadiusAccounting()
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
"/var/lib/python-support/python2.5/mediaproxy/interfaces/accounting/radius.py",
line 81, in __init__
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]         secret =
secrets[server]
Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]    
exceptions.KeyError: 'localhost'

Hope it helps, also the config.ini file

[Relay]
dispatchers = 127.0.0.1 192.168.2.24 200.93.233.229

[Dispatcher]
socket_path = dispatcher.sock
listen = 0.0.0.0
accounting = radius, database

[TLS]
certs_path = tls

[Database]
dburi = mysql://mediaproxy:aag18281@localhost/mediaproxy

[Radius]
config_file = /etc/opensips/radius/client.conf
additional_dictionary = radius/dictionary

[OpenSIPS]


The /etc/opensips/radius/client.conf is a symlink to
/etc/radiusclient-ng/radiusclient.conf
Thanks for your help.

Regards,

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Авдиенко Михаил
In reply to this post by Gabriel Bermudez

My installation is the same, except Ubuntu version: I'm using Ubuntu  
server 8.04.2

On Tue, 27 Jan 2009 00:01:11 +0800, Gabriel Bermudez <[hidden email]>  
wrote:

> Hi,
>
> I have tried to change from localhost to 127.0.0.1 and to my ip address  
> and still it doesn't works.
> With what version are you working, I'm using version 2.3.2.  I'm also  
> using Ubuntu server 8.10 and downloaded the deb files for ag-project's  
> debian repository.
> Could any that has installed mediaproxy give us a hand, please?
> Thanks for your help.
>
> Regards,
>
>
>
> Авдиенко Михаил escribió:
>> Gabriel Bermudez wrote:
>>
>>
>>> Hi list,
>>>
>>
>>
>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not able  
>>> to
>>> read the radius configuration file
>>>
>>
>>
>>> [Radius]
>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>> additional_dictionary = radius/dictionary.opensips
>>>
>>
>>
>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>> can't?!.  This log output
>>>
>>
>>
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting MediaProxy
>>> Dispatcher 2.3.2
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>>> epollreactor
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: cannot
>>> read the RADIUS configuration file
>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error: failed
>>> to create MediaProxy Dispatcher: 'localhost'
>>>
>>
>>
>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>
>>
>>
>>> Regards,
>>>
>>
>> I have this issue too. I discovered that it's related to the  
>> 'acctserver'  option in radiusclient.conf file.
>> I've played with this option trying to add two acctservers and  
>> replacing  localhost 127.0.0.1 and vice-versa.
>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any  
>> accounting, sometimes it tries
>> to create MediaProxy Dispatcher at one of the addresses specified via  
>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>> but sometimes it works as expected. I can not find out logic of this  
>> errors(
>>
>> _______________________________________________
>> Users mailing list
>> [hidden email]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>



_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Ruud Klaver
In reply to this post by Gabriel Bermudez
Hi Gabriel,

On 26 Jan 2009, at 22:54, Gabriel Bermudez wrote:

> Hi Ruud,
>
> Ruud Klaver escribió:
>> Hi,
>>
>> On 26 Jan 2009, at 17:01, Gabriel Bermudez wrote:
>>
>>> Hi,
>>>
>>> I have tried to change from localhost to 127.0.0.1 and to my ip  
>>> address
>>> and still it doesn't works.
>>> With what version are you working, I'm using version 2.3.2.  I'm  
>>> also
>>> using Ubuntu server 8.10 and downloaded the deb files for ag-
>>> project's
>>> debian repository.
>>> Could any that has installed mediaproxy give us a hand, please?
>>> Thanks for your help.
>>>
>>> Regards,
>>>
>>>
>>>
>>> Авдиенко Михаил escribió:
>>>> Gabriel Bermudez wrote:
>>>>
>>>>
>>>>> Hi list,
>>>>>
>>>>
>>>>
>>>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not  
>>>>> able to
>>>>> read the radius configuration file
>>>>>
>>>>
>>>>
>>>>> [Radius]
>>>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>>>> additional_dictionary = radius/dictionary.opensips
>>>>>
>>>>
>>>>
>>>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>>>> can't?!.  This log output
>>>>>
>>>>
>>>>
>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting  
>>>>> MediaProxy
>>>>> Dispatcher 2.3.2
>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is  
>>>>> using
>>>>> epollreactor
>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:  
>>>>> cannot
>>>>> read the RADIUS configuration file
>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:  
>>>>> failed
>>>>> to create MediaProxy Dispatcher: 'localhost'
>>>>>
>>>>
>>>>
>>>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>>>
>>>>
>>>>
>>>>> Regards,
>>>>>
>>>>
>>>> I have this issue too. I discovered that it's related to the  
>>>> 'acctserver'
>>>> option in radiusclient.conf file.
>>>> I've played with this option trying to add two acctservers and  
>>>> replacing
>>>> localhost 127.0.0.1 and vice-versa.
>>>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any
>>>> accounting, sometimes it tries
>>>> to create MediaProxy Dispatcher at one of the addresses specified  
>>>> via
>>>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>>>> but sometimes it works as expected. I can not find out logic of  
>>>> this
>>>> errors(
>>
>>
>> I agree that's not a very helpful error, it should report more.  
>> Could you change the following to make it give a full traceback:
>> in mediaproxy/interfaces/accounting/radius.py on line 94, replace  
>> "raise RuntimeError(str(e))" with just "raise". It won't be very  
>> descriptive, but at least you can give me the full traceback and I  
>> can analyze what went wrong.
>>
>> Ruud Klaver
>> AG Projects
>
> Here is the stacktrace you asked for:
>
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Log opened.
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Starting  
> MediaProxy Dispatcher 2.3.2
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Twisted is using  
> epollreactor
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error:  
> cannot read the RADIUS configuration file
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error:  
> failed to create MediaProxy Dispatcher: 'localhost'
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Traceback (most  
> recent call last):
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]     ---  
> <exception caught here> ---
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File "/usr/
> bin/media-dispatcher", line 52, in <module>
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]          
> dispatcher = Dispatcher()
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File "/var/
> lib/python-support/python2.5/mediaproxy/dispatcher.py", line 481, in  
> __init__
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]          
> self.accounting = [__import__("mediaproxy.interfaces.accounting.%s"  
> % mod.lower(), globals(), locals(), [""]).Accounting() for mod in  
> set(Config.accounting)]
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File "/var/
> lib/python-support/python2.5/mediaproxy/interfaces/accounting/
> radius.py", line 53, in __init__
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]          
> self.radius = RadiusAccounting()
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File "/var/
> lib/python-support/python2.5/mediaproxy/interfaces/accounting/
> radius.py", line 81, in __init__
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]         secret =  
> secrets[server]
> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]      
> exceptions.KeyError: 'localhost'
>
> Hope it helps, also the config.ini file
>
> [Relay]
> dispatchers = 127.0.0.1 192.168.2.24 200.93.233.229
>
> [Dispatcher]
> socket_path = dispatcher.sock
> listen = 0.0.0.0
> accounting = radius, database
>
> [TLS]
> certs_path = tls
>
> [Database]
> dburi = mysql://mediaproxy:aag18281@localhost/mediaproxy
>
> [Radius]
> config_file = /etc/opensips/radius/client.conf
> additional_dictionary = radius/dictionary
>
> [OpenSIPS]
>
>
> The /etc/opensips/radius/client.conf is a symlink to /etc/
> radiusclient-ng/radiusclient.conf
> Thanks for your help.
>
> Regards,

It seems it cannot parse the password for the server "localhost" from  
the servers file. Could you please post me the contents of your  
clients.conf and servers files? Obviously you should obfuscate the  
passwords contained in it.

Ruud Klaver
AG Projects
_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Reply | Threaded
Open this post in threaded view
|

Re: mediaproxy and radius integration

Gabriel Bermudez
Hi Ruud

Ruud Klaver escribió:

> Hi Gabriel,
>
> On 26 Jan 2009, at 22:54, Gabriel Bermudez wrote:
>
>> Hi Ruud,
>>
>> Ruud Klaver escribió:
>>> Hi,
>>>
>>> On 26 Jan 2009, at 17:01, Gabriel Bermudez wrote:
>>>
>>>> Hi,
>>>>
>>>> I have tried to change from localhost to 127.0.0.1 and to my ip
>>>> address
>>>> and still it doesn't works.
>>>> With what version are you working, I'm using version 2.3.2.  I'm also
>>>> using Ubuntu server 8.10 and downloaded the deb files for ag-project's
>>>> debian repository.
>>>> Could any that has installed mediaproxy give us a hand, please?
>>>> Thanks for your help.
>>>>
>>>> Regards,
>>>>
>>>>
>>>>
>>>> Авдиенко Михаил escribió:
>>>>> Gabriel Bermudez wrote:
>>>>>
>>>>>
>>>>>> Hi list,
>>>>>>
>>>>>
>>>>>
>>>>>> Got this issue with mediaproxy. The mediaproxy dispatcher is not
>>>>>> able to
>>>>>> read the radius configuration file
>>>>>>
>>>>>
>>>>>
>>>>>> [Radius]
>>>>>> config_file = /etc/radiusclient-ng/radiusclient.conf
>>>>>> additional_dictionary = radius/dictionary.opensips
>>>>>>
>>>>>
>>>>>
>>>>>> The file is there, opensips can read it, but mediaproxy dispatcher
>>>>>> can't?!.  This log output
>>>>>>
>>>>>
>>>>>
>>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Log opened.
>>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Starting
>>>>>> MediaProxy
>>>>>> Dispatcher 2.3.2
>>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] Twisted is using
>>>>>> epollreactor
>>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:
>>>>>> cannot
>>>>>> read the RADIUS configuration file
>>>>>> Jan 23 18:28:55 ripley media-dispatcher[6834]: [-] fatal error:
>>>>>> failed
>>>>>> to create MediaProxy Dispatcher: 'localhost'
>>>>>>
>>>>>
>>>>>
>>>>>> Don't know what I'm doing wrong.  Thanks for you advice.
>>>>>>
>>>>>
>>>>>
>>>>>> Regards,
>>>>>>
>>>>>
>>>>> I have this issue too. I discovered that it's related to the
>>>>> 'acctserver'
>>>>> option in radiusclient.conf file.
>>>>> I've played with this option trying to add two acctservers and
>>>>> replacing
>>>>> localhost 127.0.0.1 and vice-versa.
>>>>> Sometimes mediaproxy-dispatcher parses file ok, but do not send any
>>>>> accounting, sometimes it tries
>>>>> to create MediaProxy Dispatcher at one of the addresses specified via
>>>>> acctserver ("failed to create MediaProxy Dispatcher: 'localhost'")
>>>>> but sometimes it works as expected. I can not find out logic of this
>>>>> errors(
>>>
>>>
>>> I agree that's not a very helpful error, it should report more.
>>> Could you change the following to make it give a full traceback:
>>> in mediaproxy/interfaces/accounting/radius.py on line 94, replace
>>> "raise RuntimeError(str(e))" with just "raise". It won't be very
>>> descriptive, but at least you can give me the full traceback and I
>>> can analyze what went wrong.
>>>
>>> Ruud Klaver
>>> AG Projects
>>
>> Here is the stacktrace you asked for:
>>
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Log opened.
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Starting
>> MediaProxy Dispatcher 2.3.2
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Twisted is using
>> epollreactor
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error:
>> cannot read the RADIUS configuration file
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] fatal error:
>> failed to create MediaProxy Dispatcher: 'localhost'
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-] Traceback (most
>> recent call last):
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]     ---
>> <exception caught here> ---
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
>> "/usr/bin/media-dispatcher", line 52, in <module>
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]        
>> dispatcher = Dispatcher()
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
>> "/var/lib/python-support/python2.5/mediaproxy/dispatcher.py", line
>> 481, in __init__
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]        
>> self.accounting = [__import__("mediaproxy.interfaces.accounting.%s" %
>> mod.lower(), globals(), locals(), [""]).Accounting() for mod in
>> set(Config.accounting)]
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
>> "/var/lib/python-support/python2.5/mediaproxy/interfaces/accounting/radius.py",
>> line 53, in __init__
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]        
>> self.radius = RadiusAccounting()
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]       File
>> "/var/lib/python-support/python2.5/mediaproxy/interfaces/accounting/radius.py",
>> line 81, in __init__
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]         secret =
>> secrets[server]
>> Jan 26 16:30:55 ripley media-dispatcher[14677]: [-]    
>> exceptions.KeyError: 'localhost'
>>
>> Hope it helps, also the config.ini file
>>
>> [Relay]
>> dispatchers = 127.0.0.1 192.168.2.24 200.93.233.229
>>
>> [Dispatcher]
>> socket_path = dispatcher.sock
>> listen = 0.0.0.0
>> accounting = radius, database
>>
>> [TLS]
>> certs_path = tls
>>
>> [Database]
>> dburi = mysql://mediaproxy:aag18281@localhost/mediaproxy
>>
>> [Radius]
>> config_file = /etc/opensips/radius/client.conf
>> additional_dictionary = radius/dictionary
>>
>> [OpenSIPS]
>>
>>
>> The /etc/opensips/radius/client.conf is a symlink to
>> /etc/radiusclient-ng/radiusclient.conf
>> Thanks for your help.
>>
>> Regards,
>
> It seems it cannot parse the password for the server "localhost" from
> the servers file. Could you please post me the contents of your
> clients.conf and servers files? Obviously you should obfuscate the
> passwords contained in it.
>
> Ruud Klaver
> AG Projects
You were right about the parsing, the server file had the following:

#Server Name or Client/Server pair              Key
#----------------                               ---------------
127.0.0.1                                       xxxxxx


I changed it to

#Server Name or Client/Server pair              Key
#----------------                               ---------------
localhost                                       xxxxxx

And it started to work.  Here is the client.conf file

auth_order      radius,local
login_tries     4
login_timeout   60
nologin /etc/nologin
issue   /etc/radiusclient-ng/issue
authserver      localhost
acctserver      localhost
servers         /etc/radiusclient-ng/servers
dictionary      /etc/radiusclient-ng/dictionary
login_radius    /usr/sbin/login.radius
seqfile         /var/run/radius.seq
mapfile         /etc/radiusclient-ng/port-id-map
default_realm
radius_timeout  10
radius_retries  3
bindaddr *


Also I had to install python-mysqldb package to get rid of this error:

Jan 27 10:12:40 ripley media-dispatcher[24457]: [-] Log opened.
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-] Starting MediaProxy
Dispatcher 2.3.2
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-] Twisted is using
epollreactor
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-] fatal error: failed
to create MediaProxy Dispatcher: No module named MySQLdb
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-] Traceback (most
recent call last):
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]     --- <exception
caught here> ---
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/usr/bin/media-dispatcher", line 52, in <module>
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]         dispatcher =
Dispatcher()
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/var/lib/python-support/python2.5/mediaproxy/dispatcher.py", line 481,
in __init__
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]        
self.accounting = [__import__("mediaproxy.interfaces.accounting.%s" %
mod.lower(), globals(), locals(), [""]).Accounting() for mod in
set(Config.accounting)]
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/var/lib/python-support/python2.5/mediaproxy/interfaces/accounting/database.py",
line 35, in <module>
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]         connection =
connectionForURI(Config.dburi)
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/usr/lib/python2.5/site-packages/sqlobject/dbconnection.py", line 934,
in connectionForURI
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]         conn =
connCls.connectionFromURI(uri)
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/usr/lib/python2.5/site-packages/sqlobject/mysql/mysqlconnection.py",
line 57, in connectionFromURI
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]         host=host or
'localhost', port=port or 0, **args)
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]       File
"/usr/lib/python2.5/site-packages/sqlobject/mysql/mysqlconnection.py",
line 24, in __init__
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]         import
MySQLdb, MySQLdb.constants.CR, MySQLdb.constants.ER
Jan 27 10:12:40 ripley media-dispatcher[24457]: [-]    
exceptions.ImportError: No module named MySQLdb

Just in case someone else bumps into this one too.
Ruud, once more thank you very much for you're help.

Regards,

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users