(no subject)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

(no subject)

Michael Ciupka-2
hi all,

i have some problems with the configuration from opensips for the openxcap.
the route from the file opensips.cfg must be configure
my problem is with the "main request routing logic"
I paste my main from the opensips.cfg
now i must configure it
with this help "http://openxcap.org/wiki/Installation"

when i copy and paste the main from the homepage and adjust the IP i get errors when i compile the file (/etc/init.d/ opensips start).

can somewhere help me to configure the main or can somewhere paste his/her main which works with opensips and opnexcap?

regards
michael


#
# $Id: opensips.cfg 5503 2009-03-22 16:22:32Z bogdan_iancu $
#
# OpenSIPS basic configuration script
#     by Anca Vamanu <[hidden email]>
#
# Please refer to the Core CookBook at:
#      http://www.opensips.org/index.php?n=Resources.DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#


####### Global Parameters #########

debug=6
log_stderror=yes
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/etc/opensips/tls/user/user-calist.pem"


port=5065

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.2.5:5065
alias=presence.open-ims.test:5065
#alias=open-ims.test:5065
#alias=scscf.open-ims.test:5065
#alias=presence-server.open-ims.test:5065

####### Modules Section ########

#set module path
mpath="/usr/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri_db.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"

#loadmodule "mi_datagram.so"
#loadmodule "mysql.so"
#loadmodule "presence_mwi.so"
#loadmodule "presence_xcapdiff.so"
#loadmodule "pua.so"
#loadmodule "pua_mi.so"
#loadmodule "rls.so"



/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "presence.so"
loadmodule "presence_xml.so"


# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)


# ----- usrloc params -----
#modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
modparam("usrloc", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")


# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
   in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")


# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)


# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")


# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
modparam("alias_db", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")


# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
modparam("domain", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")
modparam("domain", "db_mode", 1)   # Use caching


# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)


# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:192.168.2.6:5060")


####### Routing Logic ########

# main request routing logic

route{

    # Testlog
    log(1, "irgendwas kommt beim Presence Server an \n");

    # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        };

        if (msg:len >=  2048 ) {
                sl_send_reply("513", "Message too big");
                exit;
        };

   
   
    #if (has_totag()) {
    #    # sequential request withing a dialog should
    #    # take the path determined by record-routing
    #    if (loose_route()) {
    #        if (is_method("BYE")) {
    #            setflag(1); # do accouting ...
    #            setflag(3); # ... even if the transaction fails
    #        }
    #        route(1);
    #    } else {
    #        /* uncomment the following lines if you want to enable presence */
    #        if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
    #            # in-dialog subscribe requests
    #            route(2);
    #            exit;
    #        }
    #        if ( is_method("ACK") ) {
    #            if ( t_check_trans() ) {
    #                # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
    #                t_relay();
    #                exit;
    #            } else {
    #                # ACK without matching transaction ... ignore and discard.\n");
    #                exit;
    #            }
    #        }
    #        sl_send_reply("404","Not here");
    #    }
    #    exit;
    #}
   

    #initial requests

    # CANCEL processing
    if (is_method("CANCEL"))
    {
        if (t_check_trans())
            t_relay();
        exit;
    }

    t_check_trans();

    # authenticate if from local subscriber (uncomment to enable auth)
    ##if (!(method=="REGISTER") && from_uri==myself)
    ##{
    ##    if (!proxy_authorize("", "subscriber")) {
    ##        proxy_challenge("", "0");
    ##        exit;
    ##    }
    ##    if (!check_from()) {
    ##        sl_send_reply("403","Forbidden auth ID");
    ##        exit;
    ##    }
    ##
    ##    consume_credentials();
    ##    # caller authenticated
    ##}

    # record routing
    if (!is_method("REGISTER|MESSAGE"))
        record_route();

    # account only INVITEs
    if (is_method("INVITE")) {
        setflag(1); # do accouting
    }

    #if (!uri==myself)
    /* replace with following line if multi-domain support is used */
    ##if (!is_uri_host_local())
    #{
    #    append_hf("P-hint: outbound\r\n");
        # if you have some interdomain connections via TLS
        ##if($rd=="tls_domain1.net") {
        ##    t_relay("tls:domain1.net");
        ##    exit;
        ##} else if($rd=="tls_domain2.net") {
        ##    t_relay("tls:domain2.net");
        ##    exit;
        ##}
    #    route(1);
    #}

    # requests for my domain

    /* uncomment this if you want to enable presence server
       and comment the next 'if' block
       NOTE: uncomment also the definition of route[2] from  below */
    if( is_method("PUBLISH|SUBSCRIBE"))
    {
            route(2);
    }
    else
    {
        log(1, "kein publish oder subscribe \n");
    }

    ##if (is_method("PUBLISH"))
    ##{
    ##    sl_send_reply("503", "Service Unavailable");
    ##    exit;
    ##}
   

    if (is_method("REGISTER"))
    {
        # authenticate the REGISTER requests (uncomment to enable auth)
        ##if (!www_authorize("", "subscriber"))
        ##{
        ##    www_challenge("", "0");
        ##    exit;
        ##}
        ##
        ##if (!check_to())
        ##{
        ##    sl_send_reply("403","Forbidden auth ID");
        ##    exit;
        ##}

        if (!save("location"))
            sl_reply_error();

        exit;
    }

    if ($rU==NULL) {
        # request with no Username in RURI
        sl_send_reply("484","Address Incomplete");
        exit;
    }

    # apply DB based aliases (uncomment to enable)
    ##alias_db_lookup("dbaliases");

    if (!lookup("location")) {
        switch ($retcode) {
            case -1:
            case -3:
                t_newtran();
                t_reply("404", "Not Found");
                exit;
            case -2:
                sl_send_reply("405", "Method Not Allowed");
                exit;
        }
    }

    # when routing via usrloc, log the missed calls also
    setflag(2);

    route(1);
}


route[1] {
    # for INVITEs enable some additional helper routes
    if (is_method("INVITE")) {
        t_on_branch("2");
        t_on_reply("2");
        t_on_failure("1");
    }

    if (!t_relay()) {
        sl_reply_error();
    };
    exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
route[2]
{
    log(1, "Presence Route [2] \n");


    if (!t_newtran())
    {
        sl_reply_error();
        exit;
    };

    if(is_method("PUBLISH"))
    {
        handle_publish();
        #t_release();
    }
    else
    if( is_method("SUBSCRIBE"))
    {
        handle_subscribe();
        #t_release();
    }

    exit;
}


branch_route[2] {
    xlog("new branch at $ru\n");
}


onreply_route[2] {
    xlog("incoming reply\n");
}


failure_route[1] {
    if (t_was_cancelled()) {
        exit;
    }

    # uncomment the following lines if you want to block client
    # redirect based on 3xx replies.
    ##if (t_check_status("3[0-9][0-9]")) {
    ##t_reply("404","Not found");
    ##    exit;
    ##}

    # uncomment the following lines if you want to redirect the failed
    # calls to a different new destination
    ##if (t_check_status("486|408")) {
    ##    sethostport("192.168.2.100:5060");
    ##    append_branch();
    ##    # do not set the missed call flag again
    ##    t_relay();
    ##}
}

_______________________________________________
Users mailing list
[hidden email]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users